User's Manual
Docking port
CAUTION: Keep foreign objects out of the docking port. A pin or similar
object can damage the computer's circuitry.
Docking holes
Battery pack
Battery pack lock
Battery release
latch
Memory module
cover
Slim Select Bay
lock
NOTE: Use a point size 0 Phillips screwdriver.
Slim Select Bay
latch
2-6
Use this port to connect an optional Port Replicator.
These holes ensure a proper connection between the
computer and an optional Port Replicator.
The battery pack powers the computer when the AC
adaptor is not connected. The Batteries section in Chapter
6, Power and Power-Up Modes, describes how to access
the battery pack. Additional battery packs can be pur-
chased from your TOSHIBA dealer to extend the
computer's battery operating time.
Slide this lock to release or secure the battery pack.
Slide this latch to release or the battery pack.
This cover protects two memory module sockets. One
or two modules are preinstalled.
There are two screw holes next to the Slim Select Bay
latch. One screw is initially set in the front hole, which is
the unlock position. To lock the Slim Select Bay latch, set
the screw in the back hole.
Slide this latch to free the Slim Select Bay for removal.