Installing A Module; Using Optical Media Drives - Toshiba TE2000 User Manual

User's Manual

Installing a module

Install the Slim Select Bay HDD adaptor as described below.
1. Insert the Slim Select Bay HDD adaptor in the computer as shown below and
press until the ejector clicks.
2. If you want to lock the Slim Select Bay module, set the screw of the Slim
Select Bay lock in the back hole.
S S
LIM ELECT
B
AY LOCK
Figure 4-4 Installing the Slim Select Bay HDD adaptor

Using optical media drives

The text and illustrations in this section refer primarily to the DVD-ROM drive.
However, operation is the same for the CD-ROM drive, CD-R/RW drive and
CD-RW/DVD-ROM drives. The full-size drive provides high-performance
execution of DVD-ROM-based programs. You can run either 12 cm (4.72") or 8
cm (3.15") compact disks/digital versatile disks without an adaptor. An ATAPI
interface controller is used for CD-ROM operation. When the computer is access-
ing a DVD-ROM, an LED on the drive glows.
CD-ROM drive
CD
DVD-ROM drive
CD
DVD
4-4
24-speed (maximum)
24-speed (maximum)
8-speed (maximum)
S S
LIM ELECT
B
AY MODULE