Toshiba TE2000 User Manual page 153

User's Manual
CD-ROM LAN
CD-ROM LAN
You can override the settings and manually select a boot device by pressing one of
the following keys while the computer is booting:
U
Selects the USB diskette drive.
N
Selects the Network.
1 Selects the primary HDD.
2 Selects the secondary HDD.
P
Selects the PC card HDD.
C
Selects the CD-ROM*.
This procedure does not affect the settings.
* In this computer, CD refers to the DVD-ROM or CD-RW/DVD-ROM drives.
NOTES: 1. PC card HDD boot is supported only by slot 0 on the
computer. Support is guaranteed only for TOSHIBA PC
card HDDs.
2. When you assign a PC card HDD top priority, "PC" is not
displayed. However, the PC card HDD takes the position of
HDD in the Boot Priority Options list above.
Power on Boot Select
When this option is enabled, you can change the boot drive during start up. The
following message will appear for one or two seconds Press [F12] for the
boot drive selection menu.
Enabled (Default)
Disabled
To change the boot drive, follow the steps below.
1. Press F12 while the above message is on the screen.
7-8
FDDThe computer looks for bootable files in the
HDD
following order: CD-ROM*, LAN, HDD,
diskette drive.
HDDThe computer looks for bootable files in the
FDD
following order: CD-ROM*, LAN, diskette
drive and HDD.