ZN‐S1000VE Installation Guide
3. PART NAMES
3.1. Front Panel
Status
Data
○
1
① System Status LEDs
The LEDs are located on the left side of the front panel and they indicate certain system
information.
Status
This LED lights up as orange.
Data This LED lights up when the host system is turned on with a connection is made.
(The color of LEDs is subject to change according to the firmware version. To change its
setting, refer to the section 4.5.12. LED Setting of the Web Page User's Manual.)
② Video Input BNC connector
As a video input connector, connect to the camera.
③ SD memory card slot
Insert a SD memory card for local storage.
④ Loop out BNC connector
As a loop out connector, connect to a device such as a VCR or monitor.
07A.05
1CH Encoder
Vin
○
2
SD
Vout
○
3
○
4
6