Adjusting The "Rapid < = 1 Cup" Steaming Time; Adjusting The Sound Volume - Tiger JPD-A Series Operating Instructions Manual

Adjusting the "Rapid < = 1 Cup" steaming time
Complete the following procedure from steps (1) to (7) each
within 30 seconds with the power plug connected to the outlet.
If no operation is performed within 30 seconds, the current
time is displayed again and the steaming time cannot be set.
Restart the procedure to set the steaming time again.
The setting cannot be changed during cooking, when the
Keep Warm function is on, when the timer function is set , when the Timer function (Soak Timer) is in use,
during reheating, or during additional heating.
Note: To cancel adjustment of the steaming time, press the [Cancel] key.
„ Adjusting the "Rapid < = 1 Cup" steaming time
When selecting "Rapid < = 1 Cup" and adjusting the steaming time, perform the following procedure.
(1) Press the [Menu/◀▶] key to select the
"Plain" menu.
(2) Hold down the [Timer] key for
approximately 3 seconds or more.
Blinks
(3) Press the [Hr] key to set the mode to "5".
Blinks
Mode
46
● Mode ●
Value change
adjustment 0: +0 min.
5: Steaming time adjustment 1: +1 min.
2: +2 min.
(4) Press the [Start] key.
(5) Press the [Hr] and [M] keys to adjust the
time.
Blinks
Steaming time adjustment
0 : +0 min. (default setting)
1 : +1 min.
2 : +2 min.
(6) Press the [Start] key.
(7) When the [Timer] key is held down for
approximately 3 seconds or more, the
setting is completed and the current
time is displayed again.

Adjusting the sound volume

Complete the following procedure from steps (1) to (7)
each within 30 seconds with the power plug connected
to the outlet. If no operation is performed within 30
seconds, the current time is displayed again and the
sound volume cannot be set. Restart the procedure to
set the sound volume again.
The setting cannot be changed during cooking, when the Keep Warm function is on, when the Timer function
is set, when the Timer function (Soak Timer) is in use, during reheating, or during additional heating.
Note: To cancel adjustment of the sound volume, press the [Cancel] key.
„ Adjusting the sound volume (key operation sound and alarm sound)
If the key operation and alarm sounds become bothersome, adjust the volume according to the following
procedure.
(1) Press the [Menu/◀▶] key to select the
"Plain" menu.
(2) Hold down the [Timer] key for
approximately 3 seconds or more.
Blinks
(3) Check that the mode is set to "4".
If the mode is set to "5", press the [Hr] and [M]
keys to set the mode to "4".
Blinks
Mode
● Mode ●
Value change
adjustment Volume adjustment:
4: Volume adjustment 0 to -2
(4) Press the [Start] key.
(5) Press the [Hr] and [M] keys to adjust the
sound volume.
Blinks
Volume adjustment
0 : High (default setting)
-1 : Medium
-2 : Low
(6) Press the [Start] key.
(7) When the [Timer] key is held down for
approximately 3 seconds or more, the
setting is completed and the current
time is displayed again.
47