8�6
Emptying the coffee urn
The coffee urn must be emptied daily and the cleaning
program (see chapter 8.7 on page 31) will prompt
you to do so. If required, you can empty the coffee urn
manually as well.
Note
For machines in automatic mode: If an
automatic rebrewing should not be performed
afterwards, deactivate the automatic mode
(see chapter 5.5 on page 13).
1. On the display, press the menu symbol "≡" (1) (see
Fig. 40) and then "Cleaning".
͵ In self-service operation, you must first log in with
a user chip key (see chapter 5.1.4 on page 9).
2. Press the "Empty warmer" button.
Empty warmer
Jug outlet
Cup outlet
Close
The different possibilities for emptying the coffee urn
are shown:
Button
Function
Jug outlet
Emptying via the quantity outlet
Cup outlet
Emptying via the beverage outlet
Outflow
Emptying into the drain
3. Press the required button, e.g., the button to empty
the coffee urn into the drain (1).
͵ By pressing the button again, you can stop the
emptying.
͵ Afterwards you can select another type of empty-
ing or close the window.
9 The coffee urn has been emptied.
32743 • 20190801
1
Outflow
Fig. 38: Emptying the coffee urn
Cleaning
8�7
Running the cleaning program
No products can be dispensed during the cleaning
process. Product dispensing can be continued only after
the cleaning program has been ended.
CAUTION
Danger of burns!
There is a danger of burns from hot components or due
to hot liquids.
• Do not hold any body parts underneath the beverage
outlet while the cleaning program is running or
during the rinsing processes.
• Note that the water in the drip tray may be hot.
8�7�1
Preparatory activities (option)
The preparatory activities only have to be carried out
when a quantity outlet is present.
1
1. Place the splash protection pipe (1) under the
quantity outlet.
͵ With this the running rinsing liquid is drained into
the drip tray.
Fig. 39: Splash protection pipe
31
8
Need help?
Do you have a question about the Cafina XT8-F and is the answer not in the manual?