Table of Contents
Advertisement
Date:
Installation site address / building
User address
Installation company address
"Regumaq X-25" serial number
If there are any steps you do not complete
or if you respond with 'No', please explain in
the comments field!
Installation of potable water station
1
Number of installed stations
2
Number of stations with circulation
3
Designation of circulation pump(s) when
not using the Oventrop circulation set.
4
When installing several stations
4.1 Was the Tichelmann system used for the
pipework?
4.2 Were check valves installed in the pota-
ble water supply (PWC)?
5
Was an additional safety valve with ade-
quate dimensions installed in the potable
water circuit?
6
System pressure on the potable water
side
7
Was an expansion tank installed in the
potable water circuit?
8
System pressure on the storage cylinder
side
9
Was the storage cylinder side bled?
10
Was the functionality of the bleeder(s)
checked?
11
Performance, type and version of the
heat generator
12
Storage cylinder volume
13
Was/were the station(s) hydraulically
decoupled when connected?
14
When using Oventrop storage cylinders.
Has (Have) the station(s) been connected
according to the specifications?
15
Was an adequately dimensioned expan-
sion tank installed in the storage cylinder
circuit?
16
Which nominal temperature was set on
the heat generator for the storage cylin-
der?
17
Are all ball valves open?
Fresh water station "Regumaq X-25"
Tick as appropriate or
enter a value/number
Yes
No
¨
¨
¨
¨
¨
¨
bar
¨
¨
bar
¨
¨
¨
¨
kW
l
¨
¨
¨
¨
¨
¨
°C
¨
¨
Handover report
Comments/settings
Advertisement
Table of Contents
