Removal And Disposal; Dismantling Of The Fitting; Disconnection Of The Station From The Power Supply; Removal Of The Station - oventrop Regumaq X-25 Operating Instructions Manual

"Regumaq X-25"

12. Removal and disposal

If the fresh water station reaches the end of its useful
life or has suffered an irreparable defect, it must be dis-
mantled and disposed of in an environmentally friendly
manner or else its components must be recycled.
12.1 Dismantling of the fi tting
12.1.1 Disconnection of the station from the
power supply
DANGER
Danger to life due to electric current!
Danger to life due to contact with live compo-
nents.
f Completely disconnect the product from the
power supply.
f Check that no voltage is present.
f Secure the product against switching back
on.
f The product may only be installed in dry
indoor areas.
f Disconnect the station permanently from the power
supply.
 The station is disconnected from the power supply
and can be removed.

12.1.2 Removal of the station

CAUTION
Risk of injury from pressurised fl uids!
Fluids escaping under pressure may lead to
injuries.
f Before starting work make sure that the
system is depressurised.
f Wear safety goggles.
CAUTION
Risk of scalding due to hot fl uids!
If the system has been in operation, there is a
risk of scalding due to the unintentional dis-
charge of hot water or steam.
f Allow the system to cool down.
f Wear safety goggles.
CAUTION
Risk of burns due to hot components!
Any unprotected contact with hot components
may lead to burns.
f Allow the system to cool down.
f Wear safety gloves.
138112581-V01.10.2019
f Remove the station.
 The components of the station can be disposed of
separately.

12.2 Disposal

NOTICE
Risk of environmental pollution!
Incorrect disposal (for instance with standard
waste) may lead to environmental damage.
f Dispose of packaging material in an environ-
mentally friendly manner.
f Dispose of the components appropriately.
If no return or disposal agreement has been made, you
must dispose of the fi tting yourself.
f Return components to the recycling system if pos-
sible.
f Dispose of components that cannot be recycled
according to the local regulations. Disposal in the
standard waste is not permitted.
Removal and disposal
47