Switching The Device On/Off - Siemens SIMATIC IPC277E Operating Instructions Manual

Commissioning the device and device functions

4.2 Switching the device on/off

4.2 Switching the device on/off
Following the initial switch-on, the operating system pre-installed on the device is set up
automatically on the device.
NOTICE
Faulty installation
Do not switch off the device during the entire installation process. Do not change the default
values in the BIOS setup.
Procedure - Switching on the device
1. Set the On/Off switch to "ON" position.
The module carries out a self-test. During the self-test, the following message appears:
Press ESC for boot options
2. Wait for the message to disappear.
3. Follow the instructions on the screen.
Procedure - Switching off the device
To turn off the device, always select "Start > Shutdown".
If the device is not going to be used for a long period of time after shutdown, set the on/off
switch to the
Additional information
Information on your operating system is available on the Internet and on the supplied USB
stick:
● Microsoft® Windows® 7
(https://support.industry.siemens.com/cs/ww/de/view/109749497/en?dl=en)
● Microsoft® Windows® 10
(https://support.industry.siemens.com/cs/ww/de/view/109749498/en?dl=en)
● Microsoft® Windows Embedded Standard® 7
(https://support.industry.siemens.com/cs/ww/de/view/109749499/en?dl=en)
See also
Installing the software (Page 83)
62
position.
Operating Instructions, 11/2019, A5E35783335-AE
SIMATIC IPC277E