Siemens SIMATIC IPC277E Operating Instructions Manual page 133

Power
Wake on LAN
USB Port1 Wake Capability
USB Port2 Wake Capability
USB Port3/4 Wake Capability
Wake on Touch: The Wake on Touch function can by activated via the operating system. Hibernate is
not enabled by default in the operating system.
To enable Hibernate under Windows 10, follow these steps:
1. Right-click on the Windows button.
2. Click on "Command Prompt (Administrator)".
3. Enter "powercfg -h on" and then press ENTER.
4. Close the command prompt.
The IPC can now be set to "Hibernate" using the Start menu.
The IPC is powered up again when you touch the touch screen.
Advanced CPU Control
Use XD Capability
VTX-2
AESNI Feature
P-states (ACTUAL)
Turbo Mode
C-states
Max C-States
Boot
Boot Type
Quick Boot
Quiet Boot
Network Stack
Add Boot Options
USB Boot
EFI Device First
Network Stack
PXE Boot on Demand
PXE Boot Capability
Timeout
Legacy / Boot Device Priority
Normal Boot Menu
SIMATIC IPC277E
Operating Instructions, 11/2019, A5E35783335-AE
Enabled
Disabled
Disabled
Disabled
Enable
Enabled
Enabled
Enabled
Auto
Enabled
C7
Dual Boot Type
Enabled
Enabled
Disabled
Auto
Enabled
Disabled
Disabled
Disabled
Disabled
0
Standard
Technical specifications
8.6 BIOS description
133