Identification Data Of The Device - Siemens SIMATIC IPC277E Operating Instructions Manual

3.1.2

Identification data of the device

The device can be clearly identified with the help of this identification data in case of repairs
or theft.
Enter the identification data in the following table:
Order number
Serial number
Product version
Windows "Product Key"
Ethernet address 1 (MAC)
Ethernet address 2 (MAC)
You can find this information on the rating plate and COA label. The rating plate is located on
the back of the unit. The COA label is only available with pre-installed Windows operating
systems and is affixed to the rear of the device.
Procedure
1. Transfer order number, serial number, production version (FS), and Ethernet addresses
from the rating plate.
The Ethernet addresses can also be found in the BIOS Setup under "Main > Advanced >
Peripheral Configuration" (see section "Technical Specifications").
Note
Replacement device without storage media
When you order a replacement device, remove all the storage media from your device,
for example SSD. Insert the storage media in the replacement device.
2. Take down the Windows "Product Key" from the COA label.
SIMATIC IPC277E
Operating Instructions, 11/2019, A5E35783335-AE
Installing and connecting the device
3.1 Preparing for installation
6AV...
S VP
ES
33