Advanced Users Only -8; Bluetooth Connection Roles -10 - Socket S700 Command Barcodes

Scan only with scanner in Application Mode (SPP) or Application Mode (MFi-SPP)
Advanced users only.
Acceptor (default)
Configures the scanner to accept a Bluetooth connection puts the scanner in discoverable mode.
Initiator
Configures the scanner to initiate a connection to a computer/device with the Bluetooth Device Address
specified in the barcode.
The barcode must be formatted in Code 128 and contain the data #FNIaabbccddeeff# such that aabbccd-
deeff is the Bluetooth Device Address of the computer/device you want to connect to the scanner. Re-
quired for Windows when using SPP mode.
You must create a custom barcode for each computer/device that you want to connect to the scanner.
Use barcode generating software or website (e.g., http://barcode.tec-it.com))
All Bluetooth Connection Modes OK.
Advanced users only.
Packet Mode (default)
Configures the scanner to transmit decoded data in packet format.
Raw Mode
Configures the scanner to transmit decoded data in raw (unpacketed) format. Do not scan this barcode in
Application Mode (MFi-SPP).
BLUETOOTH CONNECTION ROLES
DATA MODE - FOR SPP MODE ONLY
#FNA#
#FNB013401#
#FNB013400#
10