2.2
Frequency setting
The frequency applied in the PU operation mode or external/PU combined operation mode (Pr.79="3") can be set.
To set the frequency, switch the monitor display from the Main monitor screen to the Frequency setting screen, turn
input a frequency setting value, and press
To switch back the monitor display from the Frequency setting screen to the Main monitor screen, press
NOTE
• If the external start signal (STF or STR) is ON, the External operation mode cannot be switched to the PU operation
mode.
• The screen can be switched to the Extended direct screen depending on the setting of Pr.1000 Direct setting
selection. (Refer to
to confirm the setting.
(SET)
Output frequency
1 2 : 3 4
0.00
Hz
STOP
PU
PREV
SET
NEXT
One of the Main monitor screens
page
24.)
Frequency Setting
Pres value
60.00Hz
Set value
60.00Hz
STOP
PU
BACK
SET
Frequency setting screen
FUNCTION AND BASIC OPERATION
to
.
(BACK)
2
23