Emerson Liebert NX300 Series User Manual page 38

24 Chapter 3 Electrical Installation
Bind the cables
through the cable
binding holes here
Remove the cover here, lead the cables
into the main power cabinet and connect
them to corresponding terminals
NX UPS Single Module And Parallel System 250kVA ~ 800kVA User Manual
Figure 3-5 250kVA ~ 400kVA UPS power cable routing method (bottom cable entry)
Remove the cover here and lead
the cables into the bypass cabinet
Connect the cables to the
bypass terminals
Connect the cables to the
output terminals
Bind the cables through the
cable binding holes here