Operation - REMKO KWK Series Operating And Installation Instructions

REMKO KWK series (DM)
4

Operation

The unit can be easily operated with the room tem-
perature controller available as an accessory or
regulation to be provided by the customer. It is also
possible to activate the system using a building
management system.
Use the separate operating manuals for this pur-
pose.
The controller is connected to one or more units by
a cable. If a group controller is used the maximum
current load must be observed.
Fig. 7: Room temperature controller - recessed
installation
Fig. 8: Precision room temperature controller - sur-
face-mounted installation
18
Fig. 9: Room temperature controller - surface-
mounted installation
Example controls
1 2
Fig. 10: Individual control
1: Regulation provided by the customer
2: Building management system
1 2
Fig. 11: Group activation
1: Regulation provided by the customer
2: Building management system
3: Switching relay
Help save on energy consumption in stand-by
mode! If the device, system or component is not
in use, we recommend disconnecting the power
supply. Components with a safety function is
excluded from our recommendation!
3