Table of Contents
Advertisement
holder. Make sure that lit cigarettes do
not fall into the cup holder.
Otherwise, the cup holder could be dam-
aged.
X
To open: lift up cover :.
X
To close: push down cover :.
X
To remove: pull the ashtray up and out.
X
To insert: insert the ashtray into the cup
holder.
Using the 12 V socket
X
Turn the key to position 1 in the igni-
tion lock.
X
Lift up the cover of socket :.
X
Connect the device.
The socket can be used for accessories up to
a maximum draw of 120 W (15 A).
If you use the socket for very long periods
when the engine is switched off, the 12 V
battery may discharge.
Using the accessories
Fitting and removing the floor mats
G
WARNING
Objects in the driver's footwell may
restrict the clearance around the pedals
or block a depressed pedal. This jeopard-
ises the operating and road safety of the
vehicle. There is a risk of an accident.
Stow all objects securely in the vehicle so
that they do not get into the driver's
footwell. Always fit the floormats
securely and as prescribed in order to
ensure that there is always sufficient
room for the pedals. Do not use loose
floormats and do not place several floor-
mats on top of one another.
X
Slide the driver's seat backwards.
X
To install: press securing knobs : onto
retainers ;.
X
To remove: release securing knobs :
from retainers ;.
Tablet bracket for iPad Air
Useful information
®
iPad Air
tablets can be attached to the
back of the front seats using the tablet
bracket in the rear.
The tablet bracket offers the following
functions:
The attachment can be rotated 180°
R
®
allowing the iPad
or landscape mode.
The attachment can be gently tilted
R
allowing individual setting.
®
to be used in portrait
Z
101
Advertisement
Table of Contents
