Enlarging The Load Compartment - SMART EQ forfour 2018 Owner's Manual

Enlarging the load compartment

Folding the rear seat backrest forward
G
WARNING
If the rear bench seat/rear seat and seat
backrest are not engaged they could fold
forwards, e.g. when braking suddenly or
in the event of an accident.
The vehicle occupant would thereby be
R
pushed into the seat belt by the rear
bench seat/rear seat or by the seat
backrest. The seat belt cannot protect
as intended and could result in addi-
tional injury.
Objects or loads in the boot/luggage
R
compartment cannot be restrained by
the seat backrest.
This poses an increased risk of injury.
Before every trip, make sure that the seat
backrests and the rear bench seat/rear
seat are engaged before every trip.
X
Push the head restraints all the way in.
X
Pull right or left loop : on the seat
backrest in the direction of the arrow.
X
Fold down the seat backrest fully.
Folding back the rear seat backrests
!
Make sure that the seat belt does not
become trapped when folding the rear
seat backrest back. Otherwise, it could be
damaged.
Enlarging the load compartment
X
Fold back the left or right seat backrest
until it engages.
Red lock status indicator : on the loop
must no longer be visible.
Folding the front-passenger seat
backrest forwards
Folding down the front-passenger seat
backrest (using the lever)
Seat with a lever
X
Lift lever ; and slide the front
passenger seat to its rearmost position.
X
Pull lever : forwards.
X
Fold the seat backrest forwards at the
same time.
155
Z