SMART EQ forfour 2018 Owner's Manual page 105

i
To avoid air bubbles or dirt getting
under the surface, observe the following
tips:
Do not bend the protective film.
R
Do not touch the adhesive surface of
R
the protective film.
Use disposable gloves to affix the pro-
R
tective film.
X
Carefully clean the display of the iPad
X
The adhesive surface of the protective
film is protected by a thin transparent
backing film. Peel off half the backing
film from the protective film.
X
Affix the upper edge of the protective film
to the edge of the display by applying
gentle pressure.
X
Slowly peel off the backing film from the
protective film. At the same time, care-
fully apply pressure to the protective
film with a suitable implement or plastic
card such as a credit card and smooth
over the surface.
If air bubbles or dirt particles are present
after attaching the protective film, proceed
as follows:
X
Carefully remove the protective film from
the display.
X
Remove dust and impurities.
X
Attach the protective film once again.
Inserting an iPad Air
®
.
®
Using the accessories
X
Turn attachment : so that the opening
faces the vehicle interior.
X
®
Insert iPad with Lightning connec-
tion ; first into the attachment until the
attachment audibly locks.
X
Move the attachment to the desired posi-
tion.
Charging the iPad Air
®
The iPad Air can be charged via the USB
port on the tablet bracket.
This additionally requires:
a suitable USB adapter for the 12 V socket
R
a suitable USB data cable for the USB
R
adapter and USB port on the tablet
bracket
X
Insert the USB adapter into the 12 V
socket.
X
Connect the USB data cable to the USB
adapter and the USB port on the tablet
bracket.
Removing an iPad Air
®
i The iPad is not designed for the
extreme temperatures which can be
reached in a vehicle and may be dam-
aged. For this reason, it is not recommen-
ded to leave the iPad
cle.
®
via the USB port
®
®
in a parked vehi-
Z
103