Table Of Contents - v.link CI-VL2-SY2-N Manual

Contents
1. Prior to installation
1.1. Delivery contents
1.2. Checking the compatibility of vehicle and accessories
1.3. Boxes and connectors
1.3.1. Video-Interface
1.3.2. CAN-bus box
1.3.2.1. Dip-switch settings
1.3.2.2. Enabling the interface's video inputs (dip 1-3)
1.3.2.3. RGB-video input signal selection for after-market navigation (Dip 4)
1.3.2.4. Rear-view camera setting (dip 5)
1.4. Dip-switch settings of the CAN-box
2. Installation
2.1. Place of installation
2.1.1. Place of Installation - Interface
2.1.2. Place of Installation - daughter PCB
2.2. Connection schema
2.3. Connecting video-interface and CAN-box
2.4. Connection to the vehicle's head unit
2.5. Connection to the vehicle's monitor
2.5.1. Warning notes, concerning the installation of ribbon cables
2.6. Connecting of peripheral devices
2.6.1. After market RBG navigation
2.6.2. Video-sources to AV1 and AV2
2.6.3 Audio-switch and audio-insertion
2.6.4. After-market rear-view camera
2.6.4.1. Case 1: CAN-box receives the reverse gear signal
2.6.4.2. Case 2: CAN-box does not receive the reverse gear signal
2.6.4.3. Connection Video signal
2.7. Connecting video-interface and keypad
2.8. Picture settings and guide lines
3. Interface operation
3.1. By Voice button
3.2. By keypad
4. Specifications
5. FAQ - Trouble Shooting-Interface functions
Version 06.04.2017 CI-VL2-SY2-N