Krone Bellima F 130 Original Operating Instructions
  1. Manuals
  2. Brands
  3. Krone Manuals
  4. Farm Equipment
  5. Bellima F 130
  6. Original operating instructions
Krone Bellima F 130 Original Operating Instructions

Krone Bellima F 130 Original Operating Instructions

Round baler
Hide thumbs Also See for Bellima F 130:
Table of Contents

Advertisement

Quick Links

Download this manual
Original operating instructions
Document number: 150000148_11_en-GB
Version: 01/08/2023
Round baler
Bellima F 130
From machine number: 1136331

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Bellima F 130 and is the answer not in the manual?

Questions and answers

Related Manuals for Krone Bellima F 130

Summary of Contents for Krone Bellima F 130

  • Page 1 Original operating instructions Document number: 150000148_11_en-GB Version: 01/08/2023 Round baler Bellima F 130 From machine number: 1136331...
  • Page 2 For information on your KRONE machines, also refer to mykrone.green. After you have registered, you can generate and manage your machines via the machine number so that you can view the machine data. Via your personal account, you can also access all KRONE Services.

  • Page 3: Table Of Contents

    Overload protections on the machine .................. 39 Identification plate ........................ 39 Description of the net wrapping functionality ................ 41 Description of the twine tying functionality .................  41 Technical data ..........................  43 Dimensions .......................... 43 Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 4 Setting the twine in place ...................... 71 8.12.2 Dismounting/mounting the start device of the twine tying system .......... 74 8.13 Net wrapping .......................... 75 8.13.1 Inserting the net roll ........................ 75 8.13.2 Insert net ............................  76 Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 5 Adjusting the cutting unit ...................... 113 11.12 Checking and setting the hydraulic tying start unit.............. 114 11.13 Check hydraulic hoses ...................... 115 11.14 Cleaning the machine ...................... 116 11.15 Clean the bushing and the drawbar eye ..................  116 Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 6 Changing O-ring seal on the twine coil starting device ............ 132 12.9 Setting the tailgate lock ...................... 133 12.10 Setting the mechanical baling pressure indicator .............. 134 12.11 Car jack contact points...................... 135 Waste disposal ........................ 137 Declaration of conformity .....................  138 Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 7: Information On This Document

    Information on This Document Validity This document is valid for machines of type: Bellima F 130 All information, illustrations and technical data in this document correspond to the latest state at the time of publication. We reserve the right to make design changes at any time and without notification of reasons.

  • Page 8: Figures

    This arrow identifies the result of an action step or sequence of actions. This bullet point identifies an enumeration. If the bullet point is intended, it identifies the second level of the enumeration. Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 9 The signal word DANGER warns of a hazardous situation which will result in serious injuries or death if the warning sign is ignored. WARNING The signal word WARNING warns of a hazardous situation which will result in serious injuries or death if the warning sign is ignored. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 10: Conversion Table

    Factor Inch-pound units Unit name Abbrevi- Unit name Abbrevi- ation ation Area Hectare 2.47105 Acre acres Volume flow Litres per minute L/min 0.2642 US gallons per minute Cubic metres m³/h 4.4029 per hour Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 11 Kilometres per km/h 0.6215 Miles per hour hour Volumes Litres 0.2642 US gallon US gal. Millilitre 0.0338 US ounce US oz. Cubic centi- cm³ 0.0610 Cubic inch in³ metre Weight Kilogram 2.2046 Pound Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 12: Safety

    • Attachment of unauthorised or unapproved additional equipment • Use of spare parts which are not KRONE original spare parts • Stationary operation of the machine Unauthorised modifications to the machine may affect the properties of the machine or disrupt proper operation.

  • Page 13: Service Life Of The Machine

    He has read the operating instructions and can implement the information in the operating instructions accordingly. • He is familiar with driving vehicles safely. • For road travel he has adequate knowledge of the highway code and has the stipulated driving licence. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 14: Personnel Qualification Of The Technicians

    2.4.6 Structural modifications on the machine Structural modifications and extensions that were not approved by KRONE can impair the functionality, operational safety and also the road traffic certification of the machine. As a result, persons can be seriously injured or killed.

  • Page 15: Jobs On The Machine

    „ Determine the cause of damage according to these operating instructions and repair the damage, if possible, Page 125. „ In case of damage which may affect operational safety and cannot be repaired according to these operating instructions: Have damage repaired by a qualified service centre. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 16: Danger Zones

    Page 25. This also applies to brief inspection work. „ Consider the information in all relevant operating instructions: • the operating instructions for the tractor • the operating instructions of the machine • the operating instructions of universal shaft Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 17 „ In case of dangerous situations, immediately switch off drives and instruct people to leave the danger zone. Danger zone due to trailing machine parts If machine parts are trailing, people may be seriously injured or killed. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 18: Ensuring Functionality Of Safety Devices

    „ Use only personal protective equipment which is in proper condition and offers effective protection. „ Adjust personal protective equipment to the person, for example the size. „ Remove unsuitable clothing and jewellery (e.g. rings, necklaces) and cover long hair with a hairnet. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 19: Safety Sign On The Machine

    „ Consider the overall width of the combined tractor and machine. „ Consider the larger swivel range when cornering. „ Adjust the driving speed when cornering. „ When turning, watch out for people, oncoming traffic and obstacles. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 20: Parking The Machine Safely

    Foreign objects and/or liquids in the hydraulic system and/or fuel system may impair the operational safety of the machine and cause accidents. „ Clean all connections and components. „ Close open connections by means of protective caps. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 21: Dangers Arising From Environment

    „ Warn people: Do not approach the machine. Electrical voltage differences on the ground may lead to severe electric shocks. „ Wait for help from professional rescue teams. The overhead line must be switched off. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 22: Sources Of Danger On The Machine

    Persons can suffer burns and/or scalding when hot liquids are drained. „ Wear personal protective equipment when hot consumables are drained. „ If necessary, allow liquids and machine parts to cool down before you start repair, maintenance and cleaning work. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 23: Dangers In Connection With Certain Activities: Working On The Machine

    „ Prior to any work, stop and safeguard the machine, Page 25. „ Make sure you stand securely. „ Use a suitable fall protection. „ Secure the area below the assembly point against falling objects. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 24: Dangers In Connection With Certain Activities: Working On Wheels And Tyres

    The fitting of wheels and tyres requires adequate knowledge and approved mounting tools. „ If there is a lack of knowledge, have the wheels and tyres fitted by the KRONE dealer or by a qualified tyre service.

  • Page 25: Behaviour In Dangerous Situations And In Case Of Accidents

    „ Before working on or under raised machine parts: Secure machine or machine parts against lowering by means of hydraulic shut-off device (e.g. stop cock) on machine side. „ Before working on or under raised machine parts: Safely support machine or machine parts. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 26: Carrying Out Oil Level Check And Oil And Filter Element Changes Safely

    „ Lower raised machine parts or secure them against falling, Page 25. „ Shut down and secure the machine, Page 25. „ Cordon off the danger zone of the actuated moving machine parts in a clearly visible manner. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 27: Safety Sign On The Machine

    Safety sign on the machine Each safety sign is provided with an order number and can be ordered directly from the KRONE dealer. Immediately replace missing, damaged and unrecognisable safety signs. When attaching safety signs, the contact surface on the machine must be clean and free of dirt, oil and grease to ensure optimum adhesion of the safety signs.
  • Page 28 Safety Safety sign on the machine Location and meaning of the safety signs RPG000-006 Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 29 There is a danger of being drawn in if you approach the danger zone and if you use your hands or feet to remove crop blockages. „ Before working on the pick-up, switch off the PTO shaft and the engine. Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 30 „ When uncoupling the machine, ensure that the tailgate is closed. 9. Ord. no. 27 013 422 0 (2x) Danger due to impact Risk of injury from the rolling bale. „ Ensure that no one remains in the danger zone. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 31: Information Signs On The Machine

    27 010 182 2 Information signs on the machine Each information sign is provided with an order number and can be ordered directly from the KRONE dealer. Immediately replace missing, damaged and unrecognisable information signs. Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 32 273 506-1 3. Ord. no. 274 947 0 (1x) If the machine is operated only via a hydraulic connection, the pick-up is selected via the hydraulic switching valve, Page 77. Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 33 LH = RH 100h LH = RH 27 102 133 0 9. Ord. no. 939 194 1 (2x) Use a load beam when the machine is lifted, Page 85. • Ord. no. 27 021 260 0 Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 34 Page 85. 942 012 2 • Ord. no. 27 023 958 0 There are lashing points on the machine which are marked by this information sign, Page 86. 27 023 958 0 Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 35: Safety Equipment

    Overload protection The overload protection shall protect the machine against overload, Page 39. Support jack The support jack is used to keep the machine stable when it is not connected to the tractor, Page 65. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 36: Smv Emblem

    The SMV emblem (1) is at the rear in the centre or on left. If the machine is transported on transport vehicles (for example lorry or train), the SMV emblem must be covered or dismounted. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 37: Data Memory

    - can be related to persons. Additional functions, which are contractually agreed with the customer (e.g. teleservice), allow the transmission of certain machine data from the machine. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 38: Machine Description

    Machine description Machine overview Machine description Machine overview RPG000-013 Storage compartment Support jack Hose and cable support Pick-up Document storage tube Guide wheel Universal shaft Wheel chocks Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 39: Overload Protections On The Machine

    The entire identification plate represents a legal document and should not be altered or rendered illegible! Type plate RPG000-007 The machine data are specified on a type plate (1). This is located on the right side of the machine in the storage compartment. Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 40 The machine number results from the last 7 digits of the vehicle identification number (5). To ensure that the data is always available, KRONE recommends that you enter it in the boxes on the front cover of these operating instructions.

  • Page 41: Description Of The Net Wrapping Functionality

    The machine is equipped with a storage compartment which can hold up to 6 rolls of tying twine. To ensure adequate tying safety, ensure that only plastic twine is used which has a running length of 400–1,000 m/kg. Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 42 Machine description Description of the twine tying functionality INFO KRONE recommends using KRONE excellent Round Baler Twine for twine tying. This tying twine can be ordered by quoting material number 00 929 949 * (750 m/kg) or 00 929 951 * (1,000 m/kg). The 2 twines are routed from the storage compartment via twine guide eyes, twine brake and drive roll to the starting device.

  • Page 43: Technical Data

    Technically permitted maximum speed (road travel) 40 km/h Airborne noise emission Airborne noise emission Emissions value (sound pressure level) 73.1 dB Measurement device Bruel & Kjaer, Type 2236 Accuracy class Measurement uncertainty (according to DIN EN ISO 11201) 4 dB Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 44: Ambient Temperature

    1,270 mm Recommended net width 1,230–1,250 mm 5.10 Requirements for tractor - power Requirements for tractor - power Tractor power 25 kW (34 HP) PTO speed 540 rpm PTO shaft end 1 3/8"; Z=6 Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 45: Tractor Requirements - Hydraulics

    If oils, which have different specifications, are mixed with each other, the machine may be damaged. „ Never mix oils, which have different specifications, with each other. „ Contact your KRONE service partner before using an oil with a different specification after changing the oil. Biodegradable consumables can be used on request.

  • Page 46: Lubricating Greases

    After lubricating, remove the grease coming out of the bearing position. For a list of the lubrication points to be lubricated Page 99. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 47: Initial Operation

    ü The tractor corresponds to the machine requirements, Page 43. ü The supplied operating instructions are in the document storage tube. ü The guide wheels are mounted on the pick-up, Page 48. ü Hose and cable support are mounted, Page 53. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 48: Scope Of Delivery

    5 Protective cap for universal shaft 10 Bale ejector Mounting guide wheels on pick-up On delivery, there are 2 guide wheels in the bale chamber which must be mounted on the pick- Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 49: Mounting Bale Ejector

    To ensure that the pick-up evenly picks up the crops, the drawbar height of the machine must be adjusted to the tractor used. The set drawbar height is optimal if the hitched machine is aligned horizontally or slightly tilted forward towards the tractor. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 50: Universal Shaft

    „ To prevent damage to the machine, check the length of the universal shaft whenever you change tractors. Have it corrected by a KRONE service partner if necessary. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 51: Mounting Protective Cap Of Universal Shaft

    „ Take the protective cap (1) out of the storage compartment. „ Remove the screws (3) and washers (2) pre-assembled on the machine. „ Push the protective cap (1) over the PTO shaft and mount on the machine using the screws (3) and disks (2), tightening torques, Page 104. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 52: Mounting Universal Shaft Bracket

    ü The machine has been shut down and secured, Page 25. ü The length of the universal shaft is adjusted to the tractor, Page 51. ü The protective cap is mounted, Page 51. „ Remove the screw connection (2) from the universal shaft (1). Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 53: Mounting Hose And Cable Support

    „ Mount the hose and cable holder (1) with the terminals (2) from the inside and with the nuts (4) from the outside. Æ The hoses and cables can be guided through the eye on the hose and cable holder (1) towards the tractor. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 54: Preparing Starter Roll Of Twine Tying

    „ If the pressure rolls (2) do not rotate easily, adjust the starter roll, Page 111. Preparing the brake disc of the wrapping material brake RPG000-011 „ Remove the adhesive corrosion protection film (1) from the braking surface of the brake disc (2) and dispose of it. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 55: Start-Up

    (e.g. ball-head hitch) must be in a horizontal position (+/- 3°) with respect to the ground so as not to obstruct the operational swivel angle between the mechanical connection devices. RP000-098 Example image Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 56: Mounting The Universal Shaft On The Tractor

    „ To prevent damage to the machine, check the length of the universal shaft whenever you change tractors. Have it corrected by a KRONE service partner if necessary. ü The machine has been shut down and secured, Page 25.
  • Page 57 ü The machine has been shut down and secured, Page 25. RP000-104 „ Mount the safety chain (1) on the machine. RP001-623 „ Install the safety chain (1) at a suitable position (for example: [I] or [II]) on the tractor. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 58: Connecting Hydraulic Hoses

    Opening/closing the hydraulic connection for the tailgate and lifting/lowering the pick-up „ Connect the hydraulic hose (red, 1+) to a single-acting control unit of the tractor. For changing over between tailgate and pick-up, refer to chapter "Actuating the hydraulic switching valve", Page 77. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 59: Connecting The Electronic Baling Pressure Indicator

    Æ If the indicator lamps (1) and (2) emit light until the red baling pressure indicators reach the black preselection indicators, the electronic baling pressure indicator functions correctly. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 60: Connecting The Road Lighting

    „ Guide the rope (1) to the tractor cabin in such a way that it is easily accessible but is not under tension and does not touch the tractor wheels when cornering. To operate the rope (1), Page 77. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 61: Operation

    In the event of an overload, forced tying is automatically actuated which is saved on the terminal. „ Press only round bales which do not exceed the maximum set bale diameter. „ Observe the following information on the even filling of the bale chamber. Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 62 „ Avoid swerving (2). If the swath is small and flat „ Reduce the PTO speed. „ Increase the driving speed. For very wet crops with little structure „ Reduce the baling pressure, Page 94. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 63: Completion Of The Baling Process, Start Of Tying, And Ejection Of The Round Bale

    „ To largely prevent short, brittle straw from falling out of the bale chamber when driving from one swath to the next swath, switch off the PTO shaft in the meantime. Driving speed KRONE recommends a driving speed of 5 ... 12 km/h. The driving speed while working must be adapted to the following circumstances: •...

  • Page 64: Initiating The Tying Cycle

    „ Move the lever (2) in the direction of the arrow. „ Turn the stop (1) in the direction of the arrow. Unlocking To be able to trigger a tying cycle with net wrapping, the cutting unit of the net wrapping must be unlocked. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 65: Using The Bale Counter

    „ To reset the bale counter (1), turn the knurled head screw (2) to set the indicator back to "0000". Operating support jack INFO In order to increase the base of the support jack when the ground is soft, use a suitable support. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 66: Fitting Wheel Chocks

    ü The machine has been shut down and secured, Page 25. „ To dismount the wheel chocks (1) from the machine, press the supports (2) down, pull the wheel chocks (1) upwards, and remove them. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 67: Removing/Mounting The Safety Device Which Prevents Unauthorised Use

    8.10 Pick-up 8.10.1 Bringing the pick-up to transport/working position ü For the "Hydraulic switching valve" version: The hydraulic switching valve is set to "Bringing the pick-up to transport/working position",see Page 77. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 68: Adjusting The Pick-Up Working Height

    The raking height of the pick-up drum (1) is set behind the side guard. The setting must be identical on the right-hand and left-hand machine side. KRONE recommends a distance between tines and ground of 20-30 mm. „ For the "Hydraulic connection for tailgate and pick-up" version: Actuate the control unit at the tractor (red, 1+) until the pick-up is raised.

  • Page 69: Holding-Down Clamp

    „ Hook in the spring (4) according to the swath as shown in the table. 8.11.2 Dismounting/mounting the lower holding-down clamp In case of crop blockage, the lower holding-down clamp can be dismounted temporarily. The holding-down clamp must be mounted under working conditions. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 70: Dismounting/Mounting The Upper Holding-Down Clamp

    „ Remove the linch pins (2) from the right and left sides of the machine. „ Remove the holding-down clamp (1). Mounting „ Insert the holding-down clamp (1) above the pick-up and secure with the linch pins (2) on the right and left sides of the machine. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 71: Twine Tying

    „ Knot the twine as shown in the drawing and the table below. the beginning of with the end of the beginning of with the end of twine spool twine spool twine spool twine spool Twine 1 Twine 2 Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 72 „ Insert the two twines (1) via the twine guide eyes (2) in the twine brake (3). „ Guide the two twines (1) between the spring compressors (5) and the screws (4). To set the twine brake, Page 90. Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 73 (3) and top pressure roll (6) as shown in the picture. „ Release the top lever (7) again. Threading the bottom twine (4) into the start device „ Pull the bottom lever (7) forwards and hold it. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 74: Dismounting/Mounting The Start Device Of The Twine Tying System

    „ Store the start device (2) in a clean, dry place. Mounting „ Push the start device (2) onto the supports (3) against the direction of the arrow. „ Secure with a spring cotter pin (1). Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 75: Net Wrapping

    Also observe the information on the package provided by the tying material manufacturer. INFO For trouble-free use in the field, KRONE recommends one of the "KRONE excellent" nets, see label on the machine with the number 27 016 326 *. RPG000-016 ü...

  • Page 76: Insert Net

    „ Unwind a section of the net (4) from the net roll (1), gather it at the end and guide it under the deflection shaft (2) and over the deflection shaft (3). „ Insert the net between the rubber-coated drive roll (5) and aluminium roll (7) into the tying unit (6). Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 77: Indicating The Baling Pressure Via The Electronic Baling Pressure Indicator

    8.15 Actuating the hydraulic switching valve If only one hydraulic connection is provided at the tractor, you can change between the hydraulic operation of the tailgate and the hydraulic operation of the pick-up. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 78: Opens/Closes The Tailgate

    Page 77. Opening „ Actuate the control unit on the tractor (red, 1+) until the tailgate is open. Closing „ Actuate the control unit on the tractor (red, 1+) until the tailgate is closed. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 79: Using The Stop Cock Of The Tailgate

    „ Reverse with the PTO shaft running while repeatedly actuating the control unit in the tractor (red, 1+) to raise and lower the pick-up. If this does not remove the crop blockage: „ Shut down and safeguard the machine, Page 25. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 80: Crop Blockage In The Pick-Up

    „ To lock the tailgate, close the stop cock, Page 79. CAUTION! Risk of injury due to sharp parts! Always wear appropriate protective gloves when removing crop blockages. „ Remove the round bale from the bale chamber. „ Manually remove the accumulated crops. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 81: Dismounting The Bale Ejector

    „ Remove the cover sheet (1) and the bale ejector (2) from the support (3) on the right-hand and left-hand machine sides. „ Mount the screw connection (4) on the right-hand and left-hand machine side. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 82: Driving And Transport

    ü The support jack is in the transport position, Page 65. ü The road lighting has been connected, tested and is functioning properly, Page 60. ü The pick-up is fully raised in transport position, Page 67. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 83: Parking The Machine

    „ Fit the safety device which prevents unauthorised use and keep the key in a safe place, Page 67. Securing the universal shaft If the universal shaft is not connected to the tractor, it must be secured on the drawbar with the universal shaft bracket. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 84: Checking Road Travel Lighting

    „ Connect the lighting system to the vehicle electrical system, Page 60. „ Check whether the rear lamps (1) are functional. „ Clean the rear lamps (1) and the triangular reflectors (2). „ Clean other orange reflectors on the side hoods (not illustrated). Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 85: Lifting The Machine

    Page 39. ü The machine has been shut down and secured, Page 25. „ Close the tailgate. „ Lift the pick-up into the transport position, Page 67. „ Ensure that all safety devices are locked. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 86: Lashing The Machine

    The lashing points on the machine are marked by an information sign, Page 31. RPG000-219 1 2 lashing points at the front RPG000-220 1 2 lashing points at the rear (one on the left and one on the right machine side) Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 87: Settings

    In this case, the working height is adjusted to the lowest setting. If the pick-up fails to pick the crops up well even in the lowest working height setting, adjust the drawbar height, Page 49. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 88: Setting The Height Of The Wheel Hubs

    Make the following setting on the right and left sides of the machine in the same way: „ To set the relief spring (1), loosen or tighten the nuts (2) at the eyelet bolt (3). Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 89: Adjusting The Number Of Twine Layers

    The twine limiters (1) must be set independently of the length and type of crops to prevent the twine from slipping off the round bale. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 90: Setting The Twine Brake

    Brake force of the twine setting screws (2) sion springs (3) brake (1) Clockwise higher higher Anti-clockwise lower lower It may be necessary to adjust the compression springs (3) differently so that the cut twine ends have the same length. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 91: Setting The Driver Of The Twine Tying

    RPG000-022 The number of net layers is set via the setting screw (1) on the right-hand side of the machine. Proceed as follows to set the number of net layers via dimension X: Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 92: Setting The Wrapping Material Brake

    (1). „ To set the main brake spring (6), loosen the counter nut (5) and correct the setting at the setting screw (4). „ After setting, re-tighten the counter nuts (2) and (5). Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 93: Setting The Hydraulic Tying Start Unit For Net And Twine Tying

    „ To set net wrapping [II], hook the steel cable (1) into the lever (3) and hook the synthetic rope (2) into the bottom of the storage compartment (4). Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 94: Setting The Baling Pressure

    Adjusting the sensors of the electronic baling pressure indicator RP000-224 The sensors (3) of the electronic baling pressure indicator are located on the right-hand and left- hand machine sides behind the side hoods. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 95: Setting The Bale Ejector

    „ Measure the gap at the narrowest point between the upper edge (1) and the operating bale formation conveyor (2). Æ The bale ejector has been correctly set when the gap is 10–30 mm. If the gap is greater than 30 mm: „ Tighten the screws (3) tighter. Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 96 Settings 10.13 Setting the bale ejector If the gap is less than 10 mm: „ Loosen the screws (3). Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 97: Maintenance

    „ Have the completed maintenance work confirmed by the KRONE service partner in the supplied service record booklet.

  • Page 98: Maintenance - After The Season

    Page 108 Check tyre pressure see Page 108 Check the hydraulic hoses for leaks and, if ne- see Page 115 cessary, have them replaced by a KRONE service partner. Cleaning bushing and drawbar eye see Page 116 Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 99: Maintenance - Once After 50 Hours

    When using lubricating greases not approved and when mixing different lubricating greases, the lubricated parts may be damaged. „ Only use approved lubricating greases, Page 46. „ Do not use graphite-containing lubricating greases. „ Do not mix different lubricating greases. Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 100 „ Remove excess lubricating grease at the grease nipple. Oils Plant-based oils, unless spe- „ Apply the oil evenly. cified otherwise. Left side of machine RPG000-031 Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 101 Maintenance Lubrication Chart 11.3 Every 24 operating hours (10) Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 102 Maintenance 11.3 Lubrication Chart Every 50 operating hours Every 100 operating hours Right and rear side of machine RPG000-032 Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 103 Maintenance Lubrication Chart 11.3 Every 24 operating hours Every 50 operating hours Every 100 operating hours Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 104: Lubricating The Universal Shaft

    Deviations from the tables are marked accordingly. Metric thread screws with control thread INFO The table does not apply to countersunk screws with hexagon socket in case the countersunk screw is tightened via hexagon socket. Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 105 Strength class on screw head Strength class 10.9 12.9 Tightening torque (Nm) 1,050 1,220 1,100 1,550 1,800 1,450 2,100 2,450 Metric thread screws with fine thread DV000-001 Thread size Strength class on screw head Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 106 INFO The table applies only to countersunk screws with hexagon socket and metric thread tightened via hexagon socket. DV000-000 Thread size Strength class on screw head Strength class 10.9 12.9 Tightening torque (Nm) Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 107: Checking/Maintaining Tyres

    Inspect the tyres visually „ Visually inspect tyres for cuts or breaks. Æ If there are cuts or breaks in the tyres, have the tyres repaired or replaced by a KRONE service partner. Maintenance intervals for visual inspection of the tyres, Page 97.
  • Page 108 4/5 units — 90 ... 100 Nm M14x1.5 19 mm 5 units — 130 ... 140 Nm M18x1.5 24 mm 6 units — 270 ... 290 Nm M20x1.5 30 mm 8 units — 350 ... 380 Nm M22x1.5 30 mm 8/10 units — 450 ... 510 Nm Hub centring Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 109: Protecting Brake Disc Of The Wrapping Material Brake From Corrosion

    ü The machine has been shut down and secured, Page 25. „ Dismount the guard (1) behind the crossbeam (2). Checking oil level The oil level must reach up to the inspection hole (5). If the oil does not reach the inspection hole (5): Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 110: Releasing The Cam Clutch On The Universal Shaft

    „ Turn the drive wheel (1) anticlockwise by hand until the drivers (3) have moved once completely from the inside to the outside and back. If the twine guide slides (2) and the drivers fail to run smoothly, clean the area: Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 111: Checking And Adjusting The Starter Roll And The Pressure Rolls

    If the pressure rolls (3) do not rotate easily: „ Push a screwdriver between drive roll (1) and pressure rolls (3) and lightly move it from left to right. „ If necessary, loosen the screw connection (2) and oil the bearing positions. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 112: Cleaning The Cutting Unit

    The dimension X between the friction wheel (1) and the drive wheel (2) must be X=1 mm. The dimension Y of the spring (3) must be Y=25-35 mm. „ To set dimension X or dimension Y, loosen the nuts (4) and set the dimensions X and Y. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 113: Setting The Spring Rail

    Setting the distance Y between cutter blade (7) and cutting edge (6) The distance Y between cutter blade (7) and cutting edge (6) must be X=2-5 mm. ü The tailgate is opened. ü The pick-up is lowered. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 114: Checking And Setting The Hydraulic Tying Start Unit

    For the "Net wrapping and twine tying" version RP000-131 The spring (2) on the hydraulic start cylinder (1) should compress to a dimension X=110– 120 mm when the hydraulic cylinder is extended. ü The machine has been shut down and secured, Page 25. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 115: Check Hydraulic Hoses

    When checking hydraulic hoses, the state-specific conditions (e.g., BGVU) must be observed. Performing a visual inspection „ Visually inspect all hydraulic hoses for damage and leaks and have them replaced by an authorised specialist if necessary. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 116: Cleaning The Machine

    (1) in the drawbar eye (2) is X=43 mm. If the dimension X is exceeded, the drawbar eye (1) must be replaced by a KRONE service partner. „ To minimize wear, clean the bushing (1) and the drawbar eye (2) several times a day and coat with grease.

  • Page 117: Cleaning Drive Chains

    ü The left side hood is open. ü The machine has been shut down and secured, Page 25. „ Tighten or loosen the counter nuts (4) and move the setting screw (2) until dimension X=2– 5 mm. „ Tighten the counter nuts (4). RPG000-045 Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 118: Checking And Setting The Transverse Worm Conveyors Of The Pick-Up

    When working on drive chains, there is a risk of injury due to entanglement of loose long hair or loose clothing. „ When working on the drive chains, wear protective equipment, Page 18. „ Before working on any drive chains, shut down and safeguard the machine, Page 25. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 119: Drive Chain Of The Pick-Up

    This shear bolt can be replaced when it is sheared off. The replacement shear bolts (2) are located on the guard (3). The shear bolt (4) (M8x35) can be ordered by quoting the order number 00 900 201 *. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 120: Drive Chain Of The Bale Formation Conveyor

    „ Tighten the screw connection (3). Oiling the drive chain „ Wet the drive chain (1) with oil. Consumables, Page 45. 11.19.3 Drive chain of the rollers RPG000-027 Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 121: Check The Distance Of The Roller To The Bale Formation Conveyor Chain, Set If Applicable

    ü The machine has been shut down and secured, Page 25. „ Check the dimension X. Æ If dimension X is not greater than 20 mm, the distance between the roller (1) and the bale formation conveyor chain (2) must be set. RPG000-036 Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 122: Hydraulic Diagram

    If foreign objects or liquids get into the hydraulic system, the hydraulic system may be severely damaged. „ Clean hydraulic connections and components before removal. „ Seal open hydraulic connections with protective caps. „ Ensure that foreign objects or liquids do not get into the hydraulic system. Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 123 1 Hydraulic cylinder pick-up 4 Additional hydraulic hose (for version with "hydraulic tie starting device with additional hydraulic hose for pick-up") 2 Stop cock tailgate 5 Hydraulic cylinder tie starting device 3 Hydraulic cylinder tailgate Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 124: Circuit Diagram Of The Electronic Baling Pressure Indicator

    Circuit diagram of the electronic baling pressure indicator RP000-280 1 Circuit board 6 Signal lamp right side 2 Plug 7 Signal lamp left side 3 Bushing 8 Signal generator 4 Sensor right side 9 Plug (2-pole) 5 Sensor left side Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 125: Disturbance, Cause And Remedy

    The machine height has not been set correctly with respect KRONE service partner, Page 49. to the tractor. The lower holding-down „ Set the lower holding-down clamp higher, Page 69. clamp has been set too low. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 126: Disturbances At The Tying Unit Or During The Tying Cycle

    The cutting unit does not drop completely. wrapping, Page 93. „ Remove deposits from the cutting unit. The cutting unit is blunt. „ If required, have the cutting unit replaced by a KRONE service partner. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 127: Disturbances At The Twine Tying Unit

    „ Slightly loosen the screw on the pressure rolls and The pressure rolls on the tie starting device are too slug- retighten, Page 132. gish. „ Oil the bearing positions on the pressure rolls, Page 132. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 128: Disturbances During Or After The Baling Process

    Disturbance: The bale formation conveyor chain has shortened. Possible cause Remedy „ Clean the bale formation conveyor chain and oil it using a The bale formation conveyor chain is soiled and not oiled. brush. Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 129 Page 91. net layers is too low. The wrapping material is torn. „ Use only wrapping material of the designated quality. KRONE recommends one of the "KRONE excellent" products, see label on the machine with the number 27 016 326 *. Bellima F 130...

  • Page 130: Setting The Twine Guide At The Starter Roll

    „ Correct the setting at the locking lever, Page 133. pin in the locking lever and lock hook is too large. „ Have the hydraulic cylinder replaced by a KRONE service The hydraulic cylinder at the tailgate locking is defective. partner.

  • Page 131: Setting The Cutting Unit Of The Twine Tying Unit

    ü The machine has been shut down and secured, Page 25. „ Loosen the respective screw (3) at the blade guide (2). „ Move the respective eccentric (4) to the desired position. „ Tighten the respective screw (3). Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 132: Checking And Adjusting The Starter Roll And The Pressure Rolls

    ü The twine tying starting device (2) has been dismounted, Page 74. ü The machine has been shut down and secured, Page 25. „ Dismount the O-ring (2) from the friction wheel (1) and replace with a new O-ring. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 133: Setting The Tailgate Lock

    ð If the dimension is not X=5-7 mm, the tailgate lock must be set. „ To set the tailgate lock, loosen the counter nut (4) and turn the piston rod (5) until the dimension X=5-7 mm. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 134: Setting The Mechanical Baling Pressure Indicator

    „ To tension the wire rope (1), move the eyelet bolt (2) in direction of the arrow until the respective baling pressure indicator is in the correct position. „ Tighten the nuts (2). Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 135: Car Jack Contact Points

    „ If work has to be performed under the machine, securely support the machine, Page 25. The car jacking points are located on the left and right on the single axle and are marked with a label. Bellima F 130 Original operating instructions 150000148_11_en-GB...
  • Page 136 Disturbance, cause and remedy 12.11 Car jack contact points RPG000-177 1 Car jack contact point at rear left 2 Car jack contact point at rear right Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 137: Waste Disposal

    All synthetic materials must be taken to a recycling centre for synthetic materials. Rubber • All rubber parts (e.g. hoses, tyres) must be taken to a rubber recycling centre. Electronic components • All electronic components must be taken to a disposal point for electronic scrap. Bellima F 130 Original operating instructions 150000148_11_en-GB...

  • Page 138: Declaration Of Conformity

    Declaration of conformity Declaration of conformity UKCA Declaration of Conformity KRONE Agriculture SE Heinrich-Krone-Straße 10, D-48480 Spelle hereby declare, as manufacturer of the product named below, under our sole responsibility, that the Machine: Round baler Series: Bellima F 130 to which this declaration refers is in compliance with the following relevant provisions of: •...
  • Page 139 Maschinenfabrik Bernard Krone GmbH & Co. KG * Heinrich-Krone-Straße 10 D-48480 Spelle * Postfach 11 63 D-48478 Spelle ' +49 (0) 59 77 / 935-0 6 +49 (0) 59 77 / 935-339 ü www.landmaschinen.krone.de...

Table of Contents