Page 1
Single Monitor Desk Stand Instruction Manual SKU: STAND-V001HG Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v001hg help@vivo-us.com www.vivo-us.com 1-800-371-5654...
TOOLS NEEDED WARNING! DO NOT EXCEED WEIGHT CAPACITY. 22lbs Failure to do so may result in serious injury. (9.98kg) If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or Phillips defective parts.
Page 3
STEP 1 (Continued) STEP 2 OPTION B: Grommet Base Installation Install Monitor Arm (c) to the Pole (a). Fasten the bolt with supplied Allen Key (u). Attach the Wire If the existing grommet hole comes with a plastic protector, Clip (o) to the Pole (a) with the large Allen Key (u). first remove it to ensure a flat mounting surface.
Page 4
STEP 3 (Continued) STEP 5 OPTION B: Curved Back Monitor Tighten the grub screw in the Monitor Arm (c) using the small Allen Key (u) to fix the tilting angle. For monitor with curved back, attach VESA plate (d) to monitor using M4x30 bolts (r) with spacers (s). Manage the cables and store tools using the Wire Clip (o).
Page 5
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
Need help?
Do you have a question about the STAND-V001HG and is the answer not in the manual?
Questions and answers