Install A Tn2501Ap Val; Install The Circuit Packs; Administer The Tn799Dp - Avaya MCC1 Hardware Manual

Install a TN2501AP VAL

NOTE:
To install a TN2501AP, make sure that the system is enabled for TN2501AP (VAL)
boards. If the Maximum VAL boards field on the Customer Options screen is set to 0,
then you need to obtain and install a new license file before you can install the card.
Installing the pack includes:
''Verifying the required hardware'' on page 23
•
''Install the Circuit Packs'' on page 25
•
• ''Administer the TN2501AP'' on page 26
Verifying the required hardware
Make sure that you have the required hardware:
• TN2501AP VAL circuit pack (108772583). See
page 24.
10/100BaseT backplane adapter (848525887—same one used for the IP Media
•
Processor). See ''Backplane Adapter'' on page
Tight-twisted I/O cables (700181118) only if installing in old carriers or cabinets with
•
WP cables.
LAN cable with RJ45 connectors (customer supplied).
•
Adding New Hardware to Avaya™ MCC1, SCC1, and G600 Media Gateways
May 2003
Install and Administer IP Connectivity Hardware
''Faceplate of VAL circuit pack'' on
25.
23