Avaya MCC1 Hardware Manual page 13

.
change ip-interfaces
Enable
Eth Pt Type Slot
y C-LAN 05B11 TN799
y C-LAN 01A11 TN799
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
7 Type in the following information:
NOTE:
Enable the Ethernet port last, after you have filled in the information in the other fields.
• Set Slot field to UUCSS, where UUCSS is the cabinet, carrier, and slot.
The Code and SFX fields are automatically populated with TN799DP.
•
• In the Node Name field type the same node name entered on the Node Name
screen.
• In the Subnet Mask field use the default setting unless you are given a different
subnet mask.
In the Gateway Address field use the address you are given or leave blank.
•
• Set the Net Region field to 1 unless you are given a different number.
Set the Enable Eth Pt field to y
•
8 Press to save the information and effect the new settings.
Enter
Type add data-module next and press
9
Adding New Hardware to Avaya™ MCC1, SCC1, and G600 Media Gateways
IP INTERFACES
Code Sfx Node Name
C sr1clan2
C traf-clan
Enter
May 2003
Install and Administer IP Connectivity Hardware
Page
Subnet Mask Gateway Address Rgn
255.255.248.0 172.16 .23 .254 3
255.255.248.0 172.16 .23 .254 2
255.255.255.0 .
255.255.255.0 .
255.255.255.0 .
255.255.255.0 .
255.255.255.0 .
255.255.255.0 .
255.255.255.0 .
255.255.255.0 .
255.255.255.0 .
255.255.255.0 .
255.255.255.0 .
255.255.255.0 .
255.255.255.0 .
255.255.255.0 .
255.255.255.0 .
.
13
1 of 15
Net
. .
. .
. .
. .
. .
. .
. .
. .
. .
. .
. .
. .
. .
. .
. .