Remote Unit Information - Paradyne HOTWIRE 7924 User Manual

Monitoring the Unit
Performance Statistics for V.35-Compatible Unit
Refer to the Glossary for definitions of the types of errors reported.

Remote Unit Information

The same type of information provided for the locally attached unit (CP or CO)
can also be displayed (but not changed) for the unit on the other side of the
connection (CO or CP).
From a terminal attached to a CP unit, you can display information about the CO
unit by using the HTUC menu options. Similarly, from a terminal attached to a CO
unit, the HTUR menu allows you to display information about the CP unit.
To access the HTUC menu from a CP unit, enter 5 at the Command prompt.
To access the HTUR menu from a CO unit, enter 7 at the Command prompt.
6-4
stats 1
Current 1 minute:
HDSL Errors:
FAW LoopA 0
FAW LoopB 0
CRC LoopA 0
CRC LoopB 0
FEBE LoopA 0
FEBE LoopB 0
Previous 1 minute
HDSL Errors:
FAW LoopA 0
FAW LoopB 0
CRC LoopA 0
CRC LoopB 0
FEBE LoopA 0
FEBE LoopB 0
stats
***** HTUC Menu *****
1) Board Status
2) Performance Monitor
3) Board Configuration
4) Line Build Out Configuration Help
?) Redisplays this Menu
Q) Quit
HTUC Command
June 1997 7924-A2-GB20-10
PRELIMINARY DRAFT