Paradyne HOTWIRE 7924 User Manual page 16

Installing the Unit
Package Checklist for HotWire Model 7924-A1
Verify that your package contains the following:
Connecting to the Network
Procedure
7924-A2-GB20-10
PRELIMINARY DRAFT
A HotWire Model 7924-A1 unit
VT100 Terminal Cable
A 14 twisted-pair network cable
Power cord with power transformer (optional)
Warranty card
1. Connect one end of the supplied 14 twisted-pair network cable into the rear
panel HDSL jack. Connect the other end to your HDSL network interface.
NOTE:
Do not use a flat VF network cable, as this may severely degrade the
performance of the termination unit. Use only twisted-pair network cable.
2. Connect a V.35- or DSX-1-interface cable into the appropriate connector on
the rear panel. Connect the other end to your V.35 or DSX-1 equipment.
June 1997
2
2-1