Paradyne HOTWIRE 7924 User Manual page 33

Select a time frame from the above list to display statistics for a specified time
period.
Performance Statistics for DSX-1-Compatible Unit
The type of statistics displayed under the T1 Errors column depends on which
type of framing is selected. When the unit is configured for D4 framing, FAS
(frame alignment signal) errors are reported. When the unit is configured for ESF
framing, CRC errors are reported.
Refer to the
7924-A2-GB20-10
PRELIMINARY DRAFT
Command 2
Time Since Board Power–Up or Reset:
1 – 1 minute stats.
2 – 15 minute stats.
3 – 1 hour stats.
4 – 12 hour stats.
5 – 24 hour stats.
6 – Running total.
7 – Clear Statistics.
Q – Quit
stats
stats 1
Current 1 minute:
HDSL Errors:
FAW LoopA – 0
FAW LoopB – 0
CRC LoopA – 0
CRC LoopB – 0
FEBE LoopA – 0
FEBE LoopB – 0
Previous 1 minute:
FAW LoopA – 0
FAW LoopB – 0
CRC LoopA – 0
CRC LoopB – 0
FEBE LoopA – 0
FEBE LoopB – 0
stats
Glossary for definitions of the types of errors reported.
June 1997
17:31:51
T1 Errors:
BPV – 0
FAS – 0
MOS – 0
BPV – 0
FAS – 0
MOS – 0
Monitoring the Unit
6-3