Paradyne HOTWIRE 7924 User Manual page 17

Installing the Unit
Connecting Power to the Unit
DSX-1-Compatible HotWire 7924 – Rear Panel
V.35-Compatible HotWire 7924 – Rear Panel
As described in
on your power source (120 Vac, 230 Vac, or – 48 Vdc).
Your package may also include a country-specific adapter. To obtain information
on the various power cord adapters available, refer to
Service Information
If your package includes a 120 Vac or 230 Vac power cord with transformer: Plug
the power transformer into an available 115/230 Vac power outlet, running the
power lead to the unit housing. Neatly route the – 48 Vdc cable to the housing,
securing the cable to the wall and providing strain relief. Connect the power lead
into the – 48 Vdc plug on the rear panel.
If your package did not include a power cord: Connect the unit into an external
– 48 volt power source.
2-2
HDSL
HDSL
Chapter 1, there are several options for power cords, depending
on page A at the beginning of this User's Guide.
June 1997
48 VDC
150 mA
Power
V.35
48 VDC
Warranty, Sales, and
DS-1
97-15356
97-15264
7924-A2-GB20-10
PRELIMINARY DRAFT