Program Selection; A) Automatic Charging Programme - VOLTCRAFT IPC4 Operating Instructions Manual

The system menu has the following setting functions:
Menu item
System Information
Factory Parameter
Language
Volume
Backlight
Capacity Limit
Auto Charge
Cycle Display
Back
Setting the menu language
1
On initial operation, set the menu language to your national language. If your local language is not
available, you can select English.

10. Program Selection

a) Automatic charging programme

The charger automatically detects the inserted cell and sets the optimal parameters for the charging
process.
The following charging currents can be used as presets depending on the battery type:
Battery type
Charging current
The charger adjusts the charging current based on the rechargeable battery length or
the charging slot used. If you use, for example, a long thin cell with a small capacity
such as type 14650/16650, the charging current must be manually adjusted to the cell.
NiZn and LiHv rechargeable battery cells must always be adjusted manually.
36
Meaning
System information (serial number, firmware version, etc.)
Reset to factory settings
Menu language selection
Signal volume adjustment (High, Medium, Low, Off)
Display brightness adjustment (High, Medium, Low)
Capacity limit adjustment (On, Off)
If the capacity limit is exceeded, the charging/discharging process will be
interrupted.
Setting selection time for automatic charging (5 s, 3 s, Off)
Setting automatic display switching for active slots (cycle display 10 s, 5 s,
Off)
Ends the system setup and returns to the main display.
AAA/10440
0.5 A
AA/10500 18650
1A
26650
2A 2.5A