Service Mode; Service Mode Entry Procedure; Service Mode Function Tree - Konica Minolta magicolor 1680MF Service Manual

Field Service Ver. 1.0 Nov. 2008

14. SERVICE MODE

14.1 SERVICE MODE entry procedure

NOTE
• Ensure appropriate security for the Service Mode entry procedure. It should
NEVER be given to any unauthorized person.
A. Procedure
1. On the initial screen, press the following keys in this order.
Select → Stop/Reset → 0 → 0 → Stop/Reset → 0 → 1
B. Exiting
• Press the Stop/Reset key.

14.2 SERVICE MODE function tree

NOTE
• The function tree is shown to comply with the format displayed on the screen.
• <*1>: Displayed only on magicolor 1690MF
• <*2>: This menu is used only for magicolor 1690MF.
• <*3>: If engine is EU type, this item doesn't display.
• <*4>: Displayed only when the lower feeder unit is installed.
SERVICE'S CHOICE
SERVICE MODE
TX SPEED <*1>
RX SPEED <*1>
TX LEVEL <*1>
RX LEVEL <*1>
DTMF LEVEL <*1>
CNG LEVEL <*1>
CED LEVEL <*1>
ECM MODE <*1>
CODING SCHEME <*1>
TONER EMPTY REPORT <*1>
PROTOCOL REPORT <*1>
GDI TIMEOUT
TWAIN TIMEOUT
ENERGY SAVE MODE <*3>
ENABLE WARNING
http://www.manuals4you.com
14. SERVICE MODE
T/C LOW
I/C LOW
Ref.
page
P.125
P.125
P.125
P.125
P.125
P.126
P.126
P.126
P.126
P.127
P.127
P.127
P.128
P.128
P.128
P.128
121