Siemens SIMATIC ET 200pro FC-2 Operating Instructions Manual page 219
Low voltage converter for the distributed i/o system
Hide thumbs
Also See for SIMATIC ET 200pro FC-2:
- Function manual (344 pages) ,
- Operating instructions manual (270 pages) ,
- Original instructions manual (256 pages)
Table of Contents
Advertisement
You leave the memory card in place:
11. Tighten all fixing screws.
12. Switch on the 24 V inverter supply volt-
13. If the firmware upgrade was successful,
14. Reconnect all connectors.
SIMATIC ET 200pro FC-2 converter
Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257324B AF
age.
the inverter LED RDY turns green after
several seconds.
9.3 Firmware upgrade and downgrade
You remove the memory card
11. Disassemble the inverter and remove it
from the ET 200pro station.
12. Remove the card with the firmware from
the inverter.
13. Plug the inverter into the ET 200pro sta-
tion and tighten all fixing screws.
14. Switch on the 24 V inverter supply volt-
age.
15. If the firmware upgrade was successful,
the inverter LED RDY turns green after
several seconds.
Repair
217
Advertisement
Table of Contents
