Clearing Clogs - Hoover MPWR 40V User Manual

Maintenance - Clearing Clogs
WARNING:
PARTS — REMOVE BATTERY BEFORE CLEANING OR SERVICING.
1
An overloaded filtration bag may
cause dirt and debris to back up
into the air flow system. Open the
bag dock and check for visible clogs
at the bag port. Change filtration
bag if contents have reached the
MAXIMUM FILL LINE.
3
If blockage is not in
the power head nozzle,
remove the lower tube.
Detach rubber straps
at bottom of bag and
remove screws to tilt
battery dock forward.
WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK AND INJURY FROM MOVING
2
Also, check for blockages in the
power head nozzle.
4
Twist lower tube connector
counterclockwise and slide
up. Pull the lower tube out
of the fan housing. Once
removed, check for blockage.
17