Clearing A Blockage - Hoover JAZZ JA1603 User Instructions

CHANGING THE BELT OR BRUSHES
If your cleaner is not picking up efficiently, the belt or brushes (or both) may need replacing, but first please make
sure you have:
• Emptied the dust container
• Cleaned the filters
• Checked for blockages
Turn the cleaner over and remove 5 retaining
1
screws attaching the brush guard to the
base.
Remove the brush guard
2
Remove brush assembly and check for wear
3
on the belt. Loop the new belt around the motor
and brush channel.
* Certain models only.
48005382 Jazz IM UK.indd 8
IMPORTANT: Switch the cleaner off and
remove the plug from the electricity supply
before dismantling cleaner
Hold the brush assembly and stretch the belt
4
until the brush can be slotted back into the
cleaner housing.
Rotate the brush to ensure movement of the belt.
5
Refit the brush guard with 5 retaining screws.
6
- 8 -

CLEARING A BLOCKAGE

IMPORTANT: Switch the cleaner off and
remove the plug from the electricity supply
before dismantling cleaner
If cleaning tools were
in use check the
cleaning tool and the
removable handle.
Check the hose by
removing it from the
cleaner, stretching it to
full length .
Turn the cleaner
over and rotate the
brushes until they
are free to rotate.
Check for a blockage in
the hose socket. Use a
flexible rod to remove
any obstruction.
Removing a blockage from
the pet hair & allergen
remover.
Open the nozzle at each
side, lift cover and remove
the blockage.
*Certain models only.
5/15/2012 9:54:30 AM