Removing The Brushroll And Belt - Hoover MPWR 40V User Manual

Maintenance - Removing the brushroll and belt
WARNING:
SERVICING. DO NOT USE VACUUM WITHOUT INNER FILTRATION BAG IN PLACE.
1
Lay the unit flat to access
the power head nozzle.
Remove the 7 screws to take
off the baseplate from the
power head.
SPECIAL
3
Rotate both plastic black
endcaps at the ends of the
brushroll to show a single
notch "SPECIAL" position.
Insert back into the holding
channels of the power head
nozzle.
TO REDUCE THE RISK OF PERSONAL INJURY, UNPLUG BEFORE CLEANING OR
2
Remove the brushroll
belt and brushroll from
the holding channels
inside of the power
head nozzle.
4
When rotating the black
endcaps on the brushroll,
make sure both endcap
settings are the same and
faceup when you insert
the brushroll.
15