Brushbar; Clearing A Blockage; P10 - Hoover HL4 Instruction Manual

4. CLEANER MAINTENANCE

4.4 BRUSHBAR

Thanks to ANTI-TWIST, your new upright vacuum features an integrated comb which helps to prevent hair wrapping around the brushbar. However,
if your cleaner is not picking up efficiently, or the LED lights on the nozzle are flashing (brushbar status indicator), your brushbar may need to be
cleaned.
STEP 1: Turn the cleaner STEP 2: Remove the
over to access the nozzle. brushbar guard.
Using a coin or screwdriver,
rotate 3 x locking clips 90°to
unlock the brush guard.
4. CLEANER MAINTENANCE

4.5 CLEARING A BLOCKAGE

FLOOR NOZZLE:
1. Remove the brushbar to visually identify any obstructions and remove them.
2. Thoroughly clean underneath the comb area to remove excess dust and debris.
3. Visualy check the nozzle neck for any blockages and remove them.
1
* Certain Models Only
STEP 3: Lift the brushbar
end latch to release the
brushbar and remove
from the nozzle.
3
2
STEP 4: Remove the
brushbar from nozzle and
remove any excess debris.
OTHER COMPONENTS & ACCESSORIES:
Remove the hose, handle, wand, crevice tool and mini turbo nozzle from
your product.
Vigorously shake the hose and visually check all components for any
obstructions and remove them

P10

STEP 5: Refit the brushbar STEP 6: Using a coin or
to the nozzle. screwdriver, rotate 3 x
locking clips 90°to lock the
brush guard.
.
1
*
2