Operating Instructions (Installing Battery Pack); Operating Instructions (Removing Battery Pack); Safe Disposal - Pacvac Superpro battery 700 02BA700VB Product & Training Manual

Operating Instructions
Installing battery packs to vacuum unit
(requires 2 battery packs to operate).
1. Ensure vacuum unit power switch is in the
OFF position.
2. Turn the battery pack on its side, ensure the
charge level indicator is facing out.
3. Align the guide rails on the battery holder and
battery pack.
4. Gently slide the batteries into place until you
hear a 'click'.

Safe Disposal

Contact your local waste authority for information regarding available recycling and / or disposal options. Or
contact Pacvac by emailing contact@pacvac.com or phone +61 8 9479 1444 for the latest information.
USA and Canada Only - In some jurisdictions Call2Recyle will accept up to 12Ah batteries. Recycling your
old batteries is free and easy with the Call2Recycle program. Call2Recycle is a product stewardship program
providing no-cost battery and cellphone recycling solutions across the U.S. and Canada. For more information
about the Call2Recycling program, or for more information about a local collection site visit
www.call2recycle.org/locator or call the Call2Recycle toll free number
1-800-822-8837
Europe Only - When replacing old appliances with new ones, please check if the retailer is legally obligated to
take back your old appliance for disposal.
10
Removing battery packs from vacuum unit
1. Ensure vacuum unit power switch is in the
OFF position.
2. Remove the battery packs from the machine
by pressing both release buttons on either side
of the battery pack simultaneously.
3. Continue holding the buttons in and slide the
4
battery pack out of the machine.