Pacvac Superpro 700 Product & Training Manual
Superpro 700 series, commercial cleaners
Hide thumbs
Also See for Superpro 700:
- Product & training manual (80 pages) ,
- Product & training manual (15 pages) ,
- Product & training manual (14 pages)
Related Manuals for Pacvac Superpro 700
Summary of Contents for Pacvac Superpro 700
- Page 1 Commercial Backpack Vacuum Cleaners Support: +61 8 9479 1444 www.pacvac.com CAUTION Read the instruction manual before using the machine. Retain for future reference. Original Instructions...
-
Page 3: Table Of Contents
This manual applies to the Superpro 700 Series: Superpro 700, Duo 700, Micron 700, Trans 700 and Wispa 700. Contents General Safety Instructions Page 2 Product Specific Safety Instructions Page 2 Symbol Definitions Page 3 Patents Page 3 Wear Right... -
Page 4: General Safety Instructions
Service and Warranty Agent in order to avoid an into contact with rotating brushes of floor tools. electric shock. The power cord should only be replaced with a Pacvac Genuine Spare Part with the same 6. WARNING Do not use this machine in wet conditions. specifications. -
Page 5: Symbol Definitions
The CE Mark certifies that a product has met Allow the cleaner to cool for approximately EU consumer safety, health or environmental 30 minutes. To re-start, plug into a power requirements. point and switch back on. Class II, Double Insulated Appliance. Support: +61 8 9479 1444 www.pacvac.com... -
Page 6: Wear Right
• Adjust position and connect chest strap to secure backpack. Step 4: • Make sure the harness is resting on your hips. IMPORTANT TIP: If the backpack feels heavy or uncomfortable, it is likely you are not wearing it correctly. Contact Pacvac for further advice. -
Page 7: Operate Right
8. If work is completed disconnect power cord from power point then wind from the backpack towards the end of the power cord to reduce likelihood of cable twists. In the process check for nicks, cuts, fractures, and knots. Support: +61 8 9479 1444 www.pacvac.com... -
Page 8: Work Right
Work Right LOOK AT THE LAYOUT (refer to the Fishbone Method below) • Find the most easily located power point. This is your starting location at the fish’s head. Your turnaround is the ‘tail’. • Check the room layout (position of desks, tables, chairs, fittings etc.) •... -
Page 9: Safety And Maintenance Checks
Check the floor tool, wand, hand piece and hose for any obstructions. WEEKLY Remove and clean external motor filter. NOTE: Any other servicing should be performed by an authorised technician. Support: +61 8 9479 1444 www.pacvac.com... -
Page 10: Troubleshooting
Our products are designed and built to be functional and durable. For information on use and maintenance please read the Product & Training Manual thoroughly. Should you require servicing contact your nearest Authorised Pacvac Service and Warranty Agent. www.pacvac.com +61 8 9479 1444... -
Page 11: Warranty
Pacvac components or has not been used and maintained as indicated in the Product and Training Manual. • Warranty repairs can only be carried out by an Authorised Pacvac Distributor or Service and Warranty Agent. Visit our website or call Pacvac for your nearest location. -
Page 12: Superpro 700 Parts Profile
Parts Profile Model Number: 01PR700VB... -
Page 13: Superpro 700 Specifications
Filter Volumetric Airflow (per second): 38 litres Capacity: 5 litres Weight: 5.2kg (excluding power cord assembly and hose) Vibration Level: <2.5m/s² Technical specifications, part numbers and parts profiles are subject to change without notice. Support: +61 8 9479 1444 www.pacvac.com... -
Page 14: Superpro Duo 700 Parts Profile
Parts Profile Model Number: 01DU700VB... -
Page 15: Superpro Duo 700 Specifications
Filter Volumetric Airflow (per second): 38 litres Capacity: 5 litres Weight: 5.3kg (excluding power cord assembly and hose) Vibration Level: <2.5m/s² Technical specifications, part numbers and parts profiles are subject to change without notice. Support: +61 8 9479 1444 www.pacvac.com... -
Page 16: Superpro Micron 700 Parts Profile
Parts Profile Model Number: 01MI700VB... -
Page 17: Superpro Micron 700 Specifications
Filtration: 4 stage, HEPA Rated High Grade Filter Volumetric Airflow (per second): 39 litres Capacity: 5 litres Weight: 5.3kg (excluding power cord assembly and hose) Vibration Level: <2.5m/s² Technical specifications, part numbers and parts profiles are subject to change without notice. Support: +61 8 9479 1444 www.pacvac.com... -
Page 18: Superpro Trans 700 Parts Profile
Parts Profile Model Number: 01TR700VB... -
Page 19: Superpro Trans 700 Specifications
Filter Volumetric Airflow (per second): 29 litres Capacity: 5 litres Weight: 5.1kg (excluding power cord assembly and hose) Vibration Level: <2.5m/s² Technical specifications, part numbers and parts profiles are subject to change without notice. Support: +61 8 9479 1444 www.pacvac.com... -
Page 20: Superpro Wispa 700 Parts Profile
Parts Profile Model Number: 01WI700VB... -
Page 21: Superpro Wispa 700 Specifications
Volumetric Airflow (per second): 37 litres; wispa mode 31 litres Capacity: 5 litres Weight: 4.7kg (excluding power cord assembly and hose) Vibration Level: <2.5m/s² Technical specifications, part numbers and parts profiles are subject to change without notice. Support: +61 8 9479 1444 www.pacvac.com... -
Page 22: Superpro 700 Series Harness And Accessories Parts Profile
Series Harness and Accessories Parts Profile... -
Page 23: Optional Extras
17. Floor Tool - Power Head - 32-38mm - 305mm FLT014 18. Wand - Telescopic - Chrome - 32mm WND001 Technical specifications, part numbers and parts profiles are subject to change without notice. Optional Extras REV : SEP 09 P102 Support: +61 8 9479 1444 www.pacvac.com... - Page 24 Service & Help For service and help contact Pacvac on +61 8 9479 1444 or email support@pacvac.com Alternatively visit our website at www.pacvac.com for a list of your nearest Authorised Distributors and Service and Warranty Agents. Revised: September 2017 PACVAC PTY LTD...