Safety And Maintenance Checks; Troubleshooting - Pacvac Superpro battery 700 02BA700VB Product & Training Manual

Safety and Maintenance Checks

DAILY
1.
Remove,
empty
and clean
the dust bag.
4.
Check the floor tool, wand,
hand piece and hose
for any obstructions.
NOTE: Any other servicing should be performed by an authorised Service & Warranty Agent.

Troubleshooting

PROBLEM: CAUSE:
Backpack Battery not properly connected to
not working
backpack.
Battery connected to backpack while
the switch was in the ON position.
Battery pack power depleted or battery
pack is damaged.
Battery pack shuts off due to abnor-
mally high motor temperature.
Time delay protection on switch.
Backpack Dust bag full.
has no / poor
Dust bag not installed correctly.
suction
Hose not installed correctly.
Blockages.
Filters blocked.
Weak battery.
12
2.
Remove the filter
and tap
gently to clean.
WEEKLY
Remove and clean the
external motor filter.
SOLUTION:
Check and re-connect battery. Machine must have two
batteries inserted to operate.
Turn the switch to OFF and switch back ON after 5
seconds.
Check for damage. If no sign of damage then charge the
battery.
Turn machine off and ensure hose is unblocked. Ensure
dust bag is clean. After 30 minutes the machine should
be ready for use. If not, contact an Authorised Service
and Warranty Agent.
Turn the machine to the OFF position, leave for 5
seconds and then turn it back ON.
Remove, empty and clean dust bag.
Remove and empty dust bag making sure the rubber
edging is correctly fitted around the canister.
Reconnect hose and ensure it is
correctly sealed.
Remove hose, wand and floor tools; remove any
blockages.
Replace / clean filter.
Remove the batteries and charge.
3.
Check the battery pack and
charger for any sign of
damage to cables or possible
leakage.
If any damage is found, do
2
not use the battery pack.
B
A
2
1
B
A
1