Operating Instructions - Pacvac Superpro Product & Training Manual

Operating Instructions

1. Adjust the harness by following the "comfort
system" instructions so that the machine fits
your frame comfortably.
2. Stand upright, with the anti-static curved
handpiece section parallel to the floor.
3. Turn the machine on.
4. Hold the anti-static curved handpiece with one
hand at a comfortable arm's length.
5. Move forward and away from the power point.
6. Use easy underarm swinging motion when
detail cleaning and short dabs when spot
cleaning, always standing upright.
7. Once the end of the power cord has been
reached and work completed, return to the
powerpoint along the cord line to switch the
power off, and disconnect the power cord from
the powerpoint.
Vent holes
DUB029
FIL029
14
8. If work is not completed and you need to move
to another area, switch mains off, disconnect
the power cord, move toward desired area,
connect power cord to the nearest powerpoint
and repeat steps 1 through 6.
9. If work is completed disconnect power cord
from the power point and wind from the
machine towards the end of the power cord to
reduce likelihood of cable twists. In the process
check for nicks, cuts, fractures, and knots.
Duo
This vacuum is equipped with a bypass motor that avoids motor
damage in case of accidental sucking of liquid.
Do not place the machine on wet surfaces. Do not switch it on if
the machine is sitting on the floor.
Micron
This vacuum features H13 pre-motor cartridge filter which can
enhance the filtration of dust particles.
Ensure that all the filters are placed correctly and replace the
disposable sealed paper dust bag if needed. Remove, empty and
clean the reusable dust bag.