Operating Instructions; Safe Disposal - Pacvac Velo Product & Training Manual

Operating Instructions

Installing battery packs to vacuum unit
(requires 2 battery packs to operate).
1. Ensure vacuum unit power switch is in the OFF
position.
2. Ensure the charge level indicator is facing out.
3. Align the guide rails on the vacuum unit and
battery pack.
4. Gently slide the batteries into place until you
hear a 'click'.

Safe Disposal

Contact your local waste authority for information regarding available recycling and/or disposal options. Or
contact Pacvac by emailing support@pacvac.com or phone +61 8 9479 1444 for the latest information.
USA and Canada Only - In some jurisdictions Call2Recyle will accept up to 12Ah batteries. Recycling
your old batteries is free and easy with the Call2Recycle program. Call2Recycle is a product stewardship
program providing no-cost battery and cellphone recycling solutions across the U.S. and Canada. For more
information about the Call2Recycling program, or for more information about a local collection site visit
www.call2recycle.org/locator or call the Call2Recycle toll free number
1-800-822-8837
Europe Only - When replacing old appliances with new ones, please check if the retailer is legally obligated to
take back your old appliance for disposal.
12
Removing battery packs from vacuum
unit.
1. Ensure vacuum unit power switch is in the OFF
position.
2. Press the side buttons on the battery pack to
release the battery.
3. Continue holding the buttons in and slide the
battery pack out of the machine.