Pacvac Hydropro Series Product & Training Manual
Commercial wet and dry vacuum cleaners
Hide thumbs
Also See for Hydropro Series:
- Product & training manual (20 pages) ,
- Product & training manual (24 pages)
Related Manuals for Pacvac Hydropro Series
Summary of Contents for Pacvac Hydropro Series
- Page 1 Hydropro series Product & Training Manual Commercial Wet and Dry Vacuum Cleaners pacvac.com...
-
Page 3: Table Of Contents
CAUTION Read this Product & Training Manual before using the machine and instruct operators if applicable. RETAIN FOR FUTURE REFERENCE. This manual applies to the Pacvac Hydropro Series: Hydropro 21, Hydropro 36 and Hydropro 76 wet and dry vacuum cleaners. -
Page 4: General Safety Instructions
The power cord should only be replaced 3. WARNING This machine is not suitable for with a Pacvac Genuine Spare Part with the picking up hazardous dust. same specifications. 4. WARNING Do not allow the power cord to 16. -
Page 5: Product Specific Safety Instructions
Hydropro series Product Specific Safety Instructions 1. WARNING This machine is intended for the 9. Brush and Attachment Use Part No. FLT003/ vacuuming of liquids as well as wet or dry dust FLF003/FLF004 - Dry Floor Tool is intended and debris off carpeted or hard floor surfaces in for vacuuming of dry dust and debris off floor indoor areas only. -
Page 6: Specifications
Specifications Model Name Hydropro 21 Hydropro 36 Hydropro 76 Model No. 01HY021VW 01HY036VW 01HY076VW Volts/Frequency 230-250V AC 50/60Hz 230-250V AC 50/60Hz 230-250V AC 50/60Hz 1200W two-stage by- 1200W two-stage by- 2 x 1100W two-stage Motor pass pass by-pass Noise Level (at 1.5m) 76dB(A) 72dB(A) 75dB(A) -
Page 7: Operate Right
Hydropro series Operate Right How to vacuum easier and faster with no back strain. 1. Fit the appropriate floor tool or swap insert by sliding out the end panels on the floor tool, fitting insert and then sliding end panels back into position (Refer to diagram below). -
Page 8: Safety And Maintenance Checks
NOTE: Any other servicing should be performed by an Authorised Service & Warranty Agent. Please do not use if any damage is found. Safe Disposal Contact your local waste authority for information regarding available recycling and/or disposal options. Or contact Pacvac by emailing support@pacvac.com or phone +61 8 9479 1444 for the latest information. -
Page 9: Troubleshooting
Service Requirements Our products are designed and built to be functional and durable. For information on use and maintenance please read this Product & Training Manual thoroughly. Should you require servicing contact your nearest Authorised Pacvac Service and Warranty Agent. -
Page 10: Warranty
To make a claim under warranty, take the product with proof of purchase to the place of purchase. If the place of purchase does not satisfactorily rectify the matter, please contact Pacvac. Pacvac has the right to request pictures of warranty product failures or to request for those parts be returned to Pacvac's office in Western Australia. -
Page 11: Spare Parts - Hydropro 21
*Part numbers and part profiles are subject to change without notice. This part listing is a reference for genuine Pacvac spare part orders only and may not reflect the parts used to originally build the machine at time of manufacture. -
Page 12: Spare Parts - Hydropro 36
*Part numbers and part profiles are subject to change without notice. This part listing is a reference for genuine Pacvac spare part orders only and may not reflect the parts used to originally build the machine at time of manufacture. -
Page 13: Spare Parts - Hydropro 76
*Part numbers and part profiles are subject to change without notice. This part listing is a reference for genuine Pacvac spare part orders only and may not reflect the parts used to originally build the machine at time of manufacture. -
Page 14: Warranty Notes
Warranty Notes... - Page 15 Hydropro series...
- Page 16 Online Manual Visit academy.pacvac.com or scan the QR code to access the online manual. Revised: March 2021 MAN011-210315-hydropro-series-manual Pacvac Pty Ltd ABN: 60 709 396 593 7 Mackay Street, Kewdale WA 6105 AUSTRALIA +61 8 9479 1444 support@pacvac.com pacvac.com...
Need help?
Do you have a question about the Hydropro Series and is the answer not in the manual?
Questions and answers