Mechanical Specifications - Seco Q7-A29 User Manual

Qseven rel.2.0 compliant module with the amd embedded g-series family socs

2.4 Mechanical Specifications

According to Qseven

specifications, board dimensions are: 70 x 70 mm (2.76" x 2.76").

Printed circuit of the board is made of twelve layers, some of them are ground planes, for

disturbance rejection.

The MXM connector accommodates various connector heights for different carrier board

applications needs. Qseven

specification suggests two connector heights, 7.8mm and

7.5mm, but it is also possible to use different connector heights, also remaining compliant to

the standard.

When using different connector heights, please consider that, according to Qseven

specifications, components placed on bottom side of Q7-A29 will have a maximum height of

2.2mm ± 0.1. This value must be kept in mind when choosing the MXM connector's height,

if it is necessary to place components on the carrier board in the zone below the Qseven

module.

Q7-A29

Table of Contents