Advertisement
4.3.2 Peripheral configuration submenu
Menu Item
Options
OHCI 1 (USB 2/3/4/5)
Disabled / Enabled
EHCI 1 (USB 2/3/4/5)
Disabled / Enabled
OHCI 2 (Optional Serial Bridge)
Disabled / Enabled
EHCI 2 (Optional Serial Bridge)
Disabled / Enabled
OHCI 3 (USB 0/1)
Disabled / Enabled
EHCI 3 (USB 0/1)
Disabled / Enabled
xHCI (USB 0/1)
Disabled / Enabled
HD Audio
Disabled / Enabled
SATA
Disabled / Enabled
4.3.3 SATA configuration submenu
Menu Item
Options
IDE
SATA Configure As
AHCI
Serial ATA Port 0 / 1
Disabled / Enabled
Q7-A29
Q7-A29 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
Description
Enabled: Enable the OHCI controller 1 (for USB 1.1 support), which manages USB ports #2 ÷ #5
Disabled: Disable the OHCI Controller 1
Enabled: Enable the EHCI controller 1 (for USB 2.0 support), which manages USB ports 1 ÷ 4
Disabled: Disable the EHCI Controller 1
Enabled: Enable the OHCI controller 2 (for USB 1.1 support), which manages the USB to UART bridge
Disabled: Disable the OHCI Controller 2
Enabled: Enable the EHCI controller 2 (for USB 1.1 support), which manages the USB to UART bridge
Disabled: Disable the OHCI Controller 2
Can be changed only when "xHCI (USB 0/1)" is disabled
Enable or disable the selected OHCI controller, which is needed for driving USB 1.1 devices connected to
USB ports #0 - #1 at Low Speed / Full Speed.
Can be changed only when "xHCI (USB 0/1)" is disabled
Enable or disable the selected EHCI controller, which is needed for driving USB 2.0 devices connected to
USB ports #0 - #1 at High Speed.
Enable or disable the internal xHCI controller, which is needed for driving USB 3.0 devices at SuperSpeed.
It can also handle slower devices without OHCI3/EHCI3 enabling.
Enabled: Enable the HD Audio Codec
Disabled: Disable the internal HD Audio Codec
Enabled: Enable the SATA controller.
Disabled: Disable the SATA controller
Description
Set SATA Configuration type
With AHCI, is not possible to install/boot UEFI O.S., only Legacy OS can be installed (a simpler driver is
required).
Setting to IDE, the controller is managed as a PCI device, so addresses reallocation and INT line sharing is
possible.
Shows information related to eventual devices connected to SATA ports 0 or 1
48
Advertisement
