Advertisement
4.5.3 Clocks And Voltages Optimizations submenu
Menu Item
Options
LVDS Spread Spectrum
0 ÷ 1000
Percentage
HDMI Spread Spectrum
0 ÷ 1000
Percentage
PCIE Spread Spectrum
0 ÷ 1000
Percentage
0.4V 0dB / 0.6V 0dB
0.8V 0dB / 1.2V 0dB
Display Port Fixed Voltage Swing
0.4V 3.5dB / 0.6V 3.5dB
0.8V 3.5dB / 0.4V 6dB
0.6V 6dB / 0.4v 5dB
4.5.4 Watchdog Configuration submenu
Menu Item
Options
Watchdog
Enabled / Disabled
System Reset
Watchdog Action
Power Button 1s
Power Button 4s (Shutdown)
Delay To Start (sec.)
0 ÷ 600
Timout (sec.)
20 ÷ 600
Q7-A29
Q7-A29 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
Description
LVDS Spread Spectrum Percentage (Downspread) in 0.01% units. For example: 0 = No Spread Spectrum,
40 = -0.40 spread spectrum
HDMI Spread Spectrum Percentage (Downspread) in 0.01% units. For example: 0 = No Spread Spectrum,
40 = -0.40 spread spectrum
PCIE Spread Spectrum Percentage (Downspread) in 0.001% units. For example: 0 = No Spread
Spectrum, 375 = -0.375 spread spectrum
Allows the selection of the voltage swing and the pre-emphasis for Display port
Description
Enable / Disable Watchdog.
This submenu is available only when "Watchdog" is set to Enabled.
Specifies the action that must be performed when Watchdog timeout occurs.
With System Reset, the module will reset itself
With "Power Button 1s", the system will simulate the pressure for 1 sec. of Power button, which will
lead the O.S. to close all his tasks then shutdown.
With "Power Button 1s", the system will simulate the pressure for 1 sec. of Power button, which will
lead to the immediate shutdown of the module
This submenu is available only when "Watchdog" is set to Enabled.
This menu item specifies the seconds of delay, after system power up, before the watchdog timeout starts
counting.
This submenu is available only when "Watchdog" is set to Enabled.
This menu item specifies the seconds of delay before the watchdog timeout.
56
Advertisement
