Advertisement
4.3.8 Memory configurations submenu
Menu Item
Options
Memory clock setting mode
Auto / Limited
select
800 MHz / 1066 MHz / 1333
Select memory clock value
MHz / 1600 MHz
Memory ECC enable
Disabled / Enabled
Please be aware that changing Memory clock settings could lead to system instability.
4.3.9 SDIO Configuration submenu
Menu Item
Options
SD Mode
Disabled / ADMA / DMA / PIO
SD HC Version
SD 2.0 / SD 3.0
Q7-A29
Q7-A29 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
Description
This item allows selecting the memory clock settings.
In Auto mode, the clock will run according to SPD data.
In limited mode, if SPD clock is higher than the limit, then memory clock will follow limit clock
This menu item is available only when "Memory clock setting mode select" is not set to Auto.
Specifies the memory clock limit or set a specific memory clock, according to previous setting
Enable or disable the ECC Correction using the recommended AMD settings.
MCA ECC features will not work unless this feature is enabled
Description
Select the data transfer method that must be used by the Host Controller driver. It can be PIO Mode, DMA
mode or Advanced DMA mode, as described in SD Host Controller Specifications
SD Host Controller Version
52
Advertisement
