Advertisement
4.5.1 Advanced CPU control submenu
Menu Item
Options
Cool N' Quiet Support
Enabled / Disabled
Multi CORE support
Auto / Disabled
CPU C-States
Auto / Disabled
4.5.2 Thermal Zone configuration submenu
Menu Item
Options
Onboard FAN
Enabled / Disabled
Low Threshold (°C)
0 °C ÷ 115 °C
High Threshold (°C)
0 °C ÷ 115 °C
Mid Duty Cycle
0 ÷ 100
Passive Cooling Threshold (°C)
0 °C ÷ 115 °C
Critical temperature (°C)
0 °C ÷ 115 °C
Q7-A29
Q7-A29 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
Description
Enable or Disable "Cool N' Quiet" power saving and speed throttling technology for CPU idle states.
Enable / Disable Multi CORE Support
C-State ACPI Management
Description
Enable or Disable Onboard FAN
This submenu is available only when "Onboard FAN" is set to Enabled.
Select the lowest temperature under which the onboard FAN must be Off
This submenu is available only when "Onboard FAN" is set to Enabled.
Select the highest temperature above which the onboard FAN must work always at Full Speed
This submenu is available only when "Onboard FAN" is set to Enabled.
Use this item to set the Duty Cycle for the FAN when the APU temperature is between Low and High
threshold. Values that can be accepted are between 0 (0% OFF) and 100 (100%Full Speed)
Use this item to set the temperature threshold for the CPU. Above this temperature value, the CPU will start
to lower its frequency.
Use this item to set the maximum temperature that the CPU can reach. Above this temperature value, the
system will perform a critical shutdown
55
Advertisement
