Installing the Solaris Operating System From a JumpStart
Server
Note –
the Intel Ethernet Drivers (e1000g). The Solaris OS does not include e1000g drivers. For more
information about JumpStart installations, see the Solaris 10 7/07 Installation Guide: Custom
JumpStart and Advanced Installations, 819-5778.
▼
Install the Solaris Operating System from a JumpStart
Server
Power cycle the workstation.
1
Hold down the F8 key until you see the BBS Popup menu.
2
This menu allows you to select a boot device.
Select a Network: IBA GE Slot entry and press Enter.
3
The network card selected must be connected to the network and be accessible by the JumpStart
server.
Note –
necessary to configure the network card for booting through the workstation's BIOS
configuration program.
Appendix A • Installing Linux, OpenSolaris and Solaris OS Remote Images
Before you begin, build and place on the JumpStart
If the network card is properly connected to the network but does not boot, it may be
Installing the Solaris Operating System From a JumpStart Server
TM
server a Solaris image that includes
33