Detecto icon Owner's Manual page 25

Setup Menu Page 4
MENU
Zero Tracking: 10
Power up Zero: Yes
Gravity: 1.000000
OIML: No
<<<
Zero Tracking:
Touching this key will open the zero tracking screen. This will allow you to set the number
of half (1/2) divisions that the scale will attempt to maintain zero. Using the numeric keys,
enter a new value and then press the Save key to save it.
Allowable settings for zero tracking are: 0 – 100.
Power up Zero:
Touching this key will toggle the power up zeroing of the scale to Yes or No. If enabled, this
will cause the scale to attempt to zero the scale on power up.
Allowable values for Power up Zero are: Yes or No.
Gravity:
Gravity compensation accounts for latitudes and elevations that are different from where the
scale was calibrated at. In order to calculate the value for this parameter, use the
gravitational constant of the location where the scale was calibrated divided by the
gravitational constant of where the scale will be installed:
Gravitational Constant (Calibration location)
---------------------------------------------------------- = value
Gravitational Constant (Operation location)
This should give you a value close to 1 that you can enter in to compensate for variation in
gravity due to elevation/latitude.
Touching this key will open the gravity compensation entry screen. Using the numeric keys,
enter a new value and then press the Save key to save it.
NOTE: If you do not wish to use the compensation feature, it must be set to 0 (zero) in order
to disable it.
OIML:
Touching this key will toggle the OIML setting to Yes or No. The prompt window will show
the current state of the OIML setting. This setting should be enabled for all EU models to
comply with regulations.
Allowable values for OIML are: Yes or No.
 Press the >>> key to advance to the Setup Menu Page 5.
 Press the <<< key to return to the Setup Menu Page 4.
 Press the Exit key to exit Setup and return to the Weight screen.
3300-0192-0M Rev D 01/17
PAGE 4
Exit >>>
19