Body Mass Index (Bmi) Operation Manually Entering Known Height; Body Mass Index (Bmi) Operation With Id Manually Entering Known Height - Detecto icon Owner's Manual

Body Mass Index (BMI) Operation
Manually Entering Known Height
1. Press key to turn scale on.
2. If required, press 0 key to zero weight screen.
3. Press HEIGHT on display screen.
4. If POUNDS/INCHES was selected for Units: in setup, display will change to show
HEIGHT IN INCHES on screen.
a. Use numeric keys to enter up to 3 digits and decimal point (# #.#) for height in
inches and then press Save key.
5. If KILOGRAMS/CENTIMETERS was selected for Units: in setup, display will change to
show HEIGHT IN CENTIMETERS on screen.
a. Use numeric keys to enter up to 2 digits and decimal point (#.#) for height in
centimeters and then press Save key.
6. Assist patient onto scale.
7. When weight is stable, a beep will sound, weight reading will automatically lock and
AUTO LOCK will be displayed. Note that the amount of time the reading will hold is
dependent upon the Auto Locking setting in Setup. NOTE: If more time is needed,
press the key to hold the locked weight reading.
8. Scale will have completed calculating patient's BMI.
9. Read weight and BMI displayed.
10. If desired, press the
11. Assist patient off scale.
Body Mass Index (BMI) Operation with ID
Manually Entering Known Height
1. Press key to turn scale on.
2. If required, press 0 key to zero weight screen.
3. Press key.
4. Display will change to show PATIENT ID screen.
5. Using numeric keys, enter up to an 8 digit numeric identification number.
6. Press Save key.
7. Press HEIGHT on display screen.
8. If POUNDS/INCHES was selected for Units: in setup, display will change to show
HEIGHT IN INCHES on screen.
a. Use numeric keys to enter up to 3 digits and decimal point (# #.#) for height in
inches and then press Save key.
9. If KILOGRAMS/CENTIMETERS was selected for Units: in setup, display will change to
show HEIGHT IN CENTIMETERS on screen.
a. Use numeric keys to enter up to 2 digits and the decimal point (#.#) for height in
centimeters and then press Save key.
10. Assist patient onto scale.
11. When weight is stable, a beep will sound, weight reading will automatically lock and
AUTO LOCK will be displayed. Note that the amount of time the reading will hold is
dependent upon the Auto Locking setting in Setup. NOTE: If more time is needed,
press the key to hold the locked weight reading.
12. Scale will have completed calculating patient's BMI.
13. Read weight and BMI displayed.
14. If desired, press the
15. Assist patient off scale.
14
key to output EMR/EHR data.
key to output EMR/EHR data.
3300-0192-0M Rev D 01/17