Scale Setup - Detecto icon Owner's Manual

Your icon Digital Clinical Scale has been pre-configured at the factory and should not require
changes for use in most applications. However, if the factory settings do not meet the
requirements of your operation, the following describes the setup process for your scale.
NOTE: The keypad and touchscreen are not to be operated with pointed
objects (pencils, pens, fingernails, etc.). Damage to the keypad or touchscreen
resulting from this practice will NOT be covered under warranty.
To Enter Setup
1. Press key to turn the scale on.
2. The scale will show the Detecto logo briefly and then change to the Weight screen.
3. With the Weight screen displayed, press the Menu key.
4. The display will change to show the Setup Review screen.
MENU
Setup Review
Audit Trail – Cal=16, Cfg=30
Range 1: 600.0 x 0.2
Range 2: 1000.0 x 0.5
Weight Units=lb
Auto Lock=7 Sec
Motion=3 div.
ZeroTrack=10/2 d
Gravity=1.000000
5. Press Setup on the touchscreen.
6. The display will change to show the ENTER PASSWORD screen.
7. Using the 10-key on the touchscreen, enter 64870 and then press the Save key.
8. The scale is now ready for setup and calibration
Menu Functions
After pressing the Menu key to enter the Setup menu, the first screen of the menu is a
Setup Review screen where all of the settings can be reviewed at a glance. The Audit
Trail Counters for the metrological settings and the non-metrological settings are available
for review on this screen as well. Each prompt in the menu screens will show the current
value of the setting next to the prompt to easily identify what the current setting for that
parameter is.
Setup Menu Keys
 Press the Setup key on the Setup Review screen to enter into the scale configuration.
 Press the >>> key on the bottom right of the Setup Menu screen to advance to the next
menu page.
 Press the <<< key at the bottom left of the Setup Menu screen to return to the previous
menu page.
 Press the Exit key to exit Setup and return to the Weight screen.
3300-0192-0M Rev D 01/17

SCALE SETUP

PAGE 0
Height Units=IN
Sonar Ht=223.3 cm
Filter=Off
Power up zero =Yes
OIML=No
Exit Setup
15