Raven SCS 460 Installation & Service Manual page 28

7) GPS OPTIONS
A) GPS is inactive when the RATE display shows "GPS" and the DATA display shows
"InAC".
The GPS features are explained further in the GRID APPLICATION SYSTEM
MANUAL.
B) Momentarily depress
8) FIELD REFERENCE
A) RATE display will show "FrEF".
B) Enter the field number.
C) Momentarily depress
9) BAUD RATE
A) RATE display will show "bAUd".
B) Depressing
"9600".
C) Momentarily depress
10) DATA LOGGER TRIGGER VALUE
A) RATE display will show "TriG".
B) Enter the TRIGGER VALUE.
C) Momentarily depress
NOTE: The TRIGGER VALUE default value is "zero".
to a desired number ranging from 1-9999. The DATA LOGGER features will
not work if this number is not changed.
11) DATA LOGGER TRIGGER UNITS
A) RATE display will show "UniT".
B) Depressing
and "SEC". A value of "FT"["nETr"] means feet [meters], or a value of "SEC"
means seconds have been chosen as the unit of measurement for the TRIGGER
VALUE programmed previously.
C) Momentarily depress
to advance to FIELD REFERENCE.
DATA display will show "0".
to advance to BAUD RATE.
DATA display will show "1200".
momentarily changes the DATA display between "1200" and
to advance to DATA LOGGER TRIGGER VALUE.
DATA display will show "0".
to advance to DATA LOGGER TRIGGER UNITS.
DATA display will show "FT"["nETr"].
momentarily changes the DATA display between "FT" [nETr"]
to advance to DATA LOGGER.
24
This value must be changed